When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What are the 2 wire colors I should tap? Or should I just solder onto the connection directly ?
haha, ah boy you got me there. Well obviously red is power, black is ground, so i'm assuming theres either a green, purple, or white wire for the remote turn-on, something to that effect. There should only be those 3 wires as all they need is power/ground and the remote to hit them when the shifter goes into reverse.
The trunk light should be hot all the time, and just completes a ground signal when the trunk pinswitch is open...although I haven't checked on our cars, that's how most trunk pinswitches work. get a test light to confirm
The trunk light should be hot all the time, and just completes a ground signal when the trunk pinswitch is open...although I haven't checked on our cars, that's how most trunk pinswitches work. get a test light to confirm
ooooh....good lookies, wouldn't have thought of that one