dqb3000

Hey guys...just like the title says...I would like to buy one for cheap. I really don't want to put it on, but Westminster cops have pulled me over twice!...and both times they let me go with a warning...it really gets troublesome and annoying...so the front plate has to go on....

mtparker18

Google


10 char

JoelGs

iTrader: (1)

if I didn't need mine i'll let you have it., but CA police is strick as h****...search on ebay!!

habeeb89

iTrader: (3)

I would probably check around on eBay or your local junkyard (hard to find). I remember seeing a type of bracket kit at Walmart a while back, you might want to check that out.

milky

iTrader: (9)

You can get the OE one from your local lexus dealer, or you can get any screw on one from autozone or pepboys.

Solo_D33A

Get a JP one.

JoelGs

iTrader: (1)

That's what I'm talking bout JP all the way...

SLAMDGS4

iTrader: (1)

i need one too but i don't want any holes on my bumper..well at least visible ones

4ntvings

iTrader: (6)

^then just screw up/into the horizontal portion of the bumper (area where the slants are)

Ddot808

iTrader: (2)

the JP one is nice if you dont already have holes in your front bumper...the mounting holes are spaced differently than a regular license plate so you end up with 4 holes instead of 2 in your bumper.

pingu

Home Depot + DIY brackets = no holes.

bigguppy

iTrader: (15)

You can have mine.

SLAMDGS4

iTrader: (1)

..i'm a DIY guy..i never thought of that..kool..any pix of a setup like that?

pingu

There are a lot of threads in other vehicle sections discussing this. What people did is buy 1/4" strips and made 90 degree bends to them. Drill a few holes and use bolts and nuts. Then they found stock holes behind the cover to mount the strips to. It's not rocket science

I never did this because my car already had the holes drilled.

SLAMDGS4

iTrader: (1)

i'll prob do that this weekend before i get a ticket for something so simple