Signal Flasher relay?
03-10-09 | 11:20 AM
#16
BTW.
You just need one relay...the one I linked is for 4 led ... that relay is for LED blinker for front and back. If you do just two, you might have to get a different relay.
Just pull the old one and replace with the new one. It has a clip on the fuse box...and the relay itself has clips on both sides.
You just need one relay...the one I linked is for 4 led ... that relay is for LED blinker for front and back. If you do just two, you might have to get a different relay.
Just pull the old one and replace with the new one. It has a clip on the fuse box...and the relay itself has clips on both sides.
03-10-09 | 12:34 PM
#18
Driver
Joined: Aug 2008
Posts: 168
Likes: 1
From: Ct
The relay is located under the driver side kick panel..it's a pain in the but to get to. It's a little above all the fuses and it's clipped on to the fuse housing.
looks something like this:
you will lose confirmation blinker when you lock the doors with your remote however youwiill still get the beep.
looks something like this:
you will lose confirmation blinker when you lock the doors with your remote however youwiill still get the beep.
03-10-09 | 12:39 PM
#19
Northern California Regional Officer
iTrader: (5)
Joined: May 2001
Posts: 8,702
Likes: 5
From: California
Please let us know how this relay works out for you. I haven't seen your sequential signals so that would be nice to see as well.
03-10-09 | 01:56 PM
#20
is that like the mustang GTs?
03-10-09 | 02:54 PM
#21
except better
RMMGS4 - I have a video at home but it is 170mb's. I will try to convert it to a smaller format and post it up.
Chris
Last edited by excluesive; 03-10-09 at 03:01 PM.
03-10-09 | 02:58 PM
#22
I assumed your reason and you verified. I think the availability of these relays has not been that widely known since many continue to recommend resistors.
Please let us know how this relay works out for you. I haven't seen your sequential signals so that would be nice to see as well.
Please let us know how this relay works out for you. I haven't seen your sequential signals so that would be nice to see as well.
03-10-09 | 05:39 PM
#25
Lexus Fanatic
Joined: Mar 2003
Posts: 9,392
Likes: 1
From: Florida
On the sylvania bulb chart it says the turn signal is an 1156 bulb. Can anyone clarify?
http://www.sylvania.com/ConsumerProd...RG-Results.htm
EDIT: I just checked myself and it is a 7440, sorry I doubted you sam430
http://www.sylvania.com/ConsumerProd...RG-Results.htm
EDIT: I just checked myself and it is a 7440, sorry I doubted you sam430
Last edited by GS300Rich; 03-10-09 at 05:51 PM.
03-10-09 | 08:31 PM
#26
03-10-09 | 09:49 PM
#27
I have the same relay on my LS and it works great for having LED's on all 4 corners. I have had it for about a year and cost $6 on ebay from HK .
Never checked for alarm blinking as i have an aftermarket one anyway.
Never checked for alarm blinking as i have an aftermarket one anyway.
03-19-09 | 08:54 PM
#29
Lexus Fanatic
Joined: Mar 2003
Posts: 9,392
Likes: 1
From: Florida
anyone replaced this relay? If so can you take a pic of it in position or take a pic of the relay it replaces? I got to the fuse panel and there are 2 relay side by side, I think it is the one that is towards the front of the car, but it is about half the size of the relay pictured above. Can someone help me locate this relay?
the grey one