GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

CEL Codes....what to do...

Thread Tools
 
Search this Thread
 
Old 03-16-09, 11:14 AM
  #1  
sakataj
Lexus Fanatic
Thread Starter
iTrader: (182)
 
sakataj's Avatar
 
Join Date: Jun 2008
Location: tenn
Posts: 17,247
Received 73 Likes on 72 Posts
Default CEL Codes....what to do...

ok so i got a CEL light last night on the highway bout 60 mph just cruising...

read the codes and they are

P0440
P0441b
P0446b

something about a purge valve????

cleared codes and so far they havent come back yet but if they do what next? like what do i need to start doing/looking for?
Old 03-16-09, 01:39 PM
  #2  
nsf0607
Pole Position
 
nsf0607's Avatar
 
Join Date: May 2007
Location: FL
Posts: 332
Likes: 0
Received 3 Likes on 2 Posts
Default

Originally Posted by sakataj
ok so i got a CEL light last night on the highway bout 60 mph just cruising...

read the codes and they are

P0440
P0441b
P0446b

something about a purge valve????

cleared codes and so far they havent come back yet but if they do what next? like what do i need to start doing/looking for?
Sorry to hear you are getting other problems Brain.

Brain did you look in the codes thread in the DIY sticky: https://www.clublexus.com/forums/gs-...cel-codes.html

There are some ideas you can look at in the "Trouble Area" that may help.

Hope they stay gone.

GL
Nigel
Old 03-17-09, 12:17 PM
  #3  
sakataj
Lexus Fanatic
Thread Starter
iTrader: (182)
 
sakataj's Avatar
 
Join Date: Jun 2008
Location: tenn
Posts: 17,247
Received 73 Likes on 72 Posts
Default

Originally Posted by nsf0607
Sorry to hear you are getting other problems Brain.

Brain did you look in the codes thread in the DIY sticky: https://www.clublexus.com/forums/gs-...cel-codes.html

There are some ideas you can look at in the "Trouble Area" that may help.

Hope they stay gone.

GL
Nigel

nahh nigel i didnt, but i will now...i posted right before i left work...

u know u always call me brain instead of brian....going on vacation again tomorrow guys cya in a few days!
Old 03-17-09, 05:35 PM
  #4  
nsf0607
Pole Position
 
nsf0607's Avatar
 
Join Date: May 2007
Location: FL
Posts: 332
Likes: 0
Received 3 Likes on 2 Posts
Default

Originally Posted by sakataj
nahh nigel i didnt, but i will now...i posted right before i left work...

u know u always call me brain instead of brian....going on vacation again tomorrow guys cya in a few days!
typeo typeo brain...brian.

Have a great time.
Old 03-17-09, 07:41 PM
  #5  
GS4_Fiend
Lexus Test Driver
iTrader: (22)
 
GS4_Fiend's Avatar
 
Join Date: Aug 2008
Location: CA
Posts: 7,050
Received 104 Likes on 82 Posts
Default

Clear the CEL. Change new gas cap. If CEL comes on again, you have a purging problem or a defective canister.
Old 03-17-09, 08:06 PM
  #6  
4play4dr
Lexus Champion
 
4play4dr's Avatar
 
Join Date: Oct 2007
Location: San Diego,CA
Posts: 2,750
Likes: 0
Received 1 Like on 1 Post
Default

i have the same 446 code and i replaced my cap and reset the ecu..code came back..so im thinkin its the purge valve as ive heard that its common that it gets stuck opened or closed..the canister, i heard rarely goes out..is there a DIY on changing the purge valve?
Old 03-18-09, 10:37 AM
  #7  
sakataj
Lexus Fanatic
Thread Starter
iTrader: (182)
 
sakataj's Avatar
 
Join Date: Jun 2008
Location: tenn
Posts: 17,247
Received 73 Likes on 72 Posts
Default

Originally Posted by nsf0607
typeo typeo brain...brian.

Have a great time.
hehehe its cool, i tease
i always try to...ne members on here from little rock wanna meet up tonight or tomorrow? yeah im starting to take your advice on my parts nigel... i have like 6 boxes scheduled to hit my work next week or so

Originally Posted by GS4_Fiend
Clear the CEL. Change new gas cap. If CEL comes on again, you have a purging problem or a defective canister.
i said i did clear the CEL'S since then they havent come back on, but since i have owned car i have had 2 unexplained ones....they came on, when i was driving to my mechanics work...they were still on, go inside get him and scanner come out, crank car and they GONE...NO HISTORY NO NOTHING! So this time i left the car on....

but like i said since he cleared them, i havent seen them again yet!

Originally Posted by 4play4dr
i have the same 446 code and i replaced my cap and reset the ecu..code came back..so im thinkin its the purge valve as ive heard that its common that it gets stuck opened or closed..the canister, i heard rarely goes out..is there a DIY on changing the purge valve?
i dunno....im hoping i dont have to make it there ...im gonna wait and see if i get CEL code again and then i'll go from there
Old 03-18-09, 08:39 PM
  #8  
TheKoosh
Driver
 
TheKoosh's Avatar
 
Join Date: May 2008
Location: MD
Posts: 101
Likes: 0
Received 0 Likes on 0 Posts
Default

did you check all the tubes going in and out of the evap control valve?
Old 03-20-09, 08:30 AM
  #9  
sakataj
Lexus Fanatic
Thread Starter
iTrader: (182)
 
sakataj's Avatar
 
Join Date: Jun 2008
Location: tenn
Posts: 17,247
Received 73 Likes on 72 Posts
Default

Originally Posted by TheKoosh
did you check all the tubes going in and out of the evap control valve?
nope...cleared the codes and was waiting for it to happen again...just got back from driving to little rock and all....STILL hasn't reappeared. so im gonna wait on it to reappear

Last edited by sakataj; 03-23-09 at 08:06 AM.
Old 03-20-09, 10:33 AM
  #10  
sakataj
Lexus Fanatic
Thread Starter
iTrader: (182)
 
sakataj's Avatar
 
Join Date: Jun 2008
Location: tenn
Posts: 17,247
Received 73 Likes on 72 Posts
Default

lookin to try and tackle fog problem this weekend. will check my fuses first, but then what? bulbs are new...how can/do i check the ballasts? n then what if its not those..

edit fog problem solved....was a fuse

Last edited by sakataj; 03-23-09 at 08:07 AM.
Old 03-23-09, 09:45 AM
  #11  
sakataj
Lexus Fanatic
Thread Starter
iTrader: (182)
 
sakataj's Avatar
 
Join Date: Jun 2008
Location: tenn
Posts: 17,247
Received 73 Likes on 72 Posts
Default

ok so guess what guys....sat night i popped ANOTHER CEL this time...

p440 again
p441 (not b this time)
p446 (not b this time)

so im gonna start doing some research i guess. i know im gonna look for a cracked hose on the purge valve....maybe a broken one, possibly a bad purge solenoid....what else do i need to know/look for?
Old 04-07-09, 12:45 PM
  #12  
sakataj
Lexus Fanatic
Thread Starter
iTrader: (182)
 
sakataj's Avatar
 
Join Date: Jun 2008
Location: tenn
Posts: 17,247
Received 73 Likes on 72 Posts
Default

ok problem resolved....for CEL codes P0440 P0441b P0446b

Originally Posted by TheKoosh
did you check all the tubes going in and out of the evap control valve?
thanks....this was it! took it to my mechanic and he found out i had a dry rotted hose....replaced everything i needed for $30 and a week l8r no CEL lights

Last edited by sakataj; 04-07-09 at 01:20 PM.
Old 04-07-09, 01:04 PM
  #13  
sam430
Lexus Champion
iTrader: (10)
 
sam430's Avatar
 
Join Date: Aug 2008
Location: somewhere CA
Posts: 3,732
Received 11 Likes on 9 Posts
Default

Originally Posted by sakataj
ok problem resolved....for CEL codes P0440 P0441b P0446b

took it to my mechanic and he found out i had a dry rotted hose....replaced everything i needed for $30 and a week l8r no CEL lights
Those are the worst types of hoes.
Old 04-07-09, 01:19 PM
  #14  
sakataj
Lexus Fanatic
Thread Starter
iTrader: (182)
 
sakataj's Avatar
 
Join Date: Jun 2008
Location: tenn
Posts: 17,247
Received 73 Likes on 72 Posts
Default

Originally Posted by sam430
Those are the worst types of hoes.
i dont know any good ones though!
Old 07-21-09, 05:44 AM
  #15  
BossGS4
Lead Lap
iTrader: (2)
 
BossGS4's Avatar
 
Join Date: Jun 2006
Location: VA
Posts: 583
Likes: 0
Received 1 Like on 1 Post
Default

I'm having the same symptoms and pull the same codes intermittently like you were.

Can you tell me where the Evap Control Valve is under the hood ?


Quick Reply: CEL Codes....what to do...



All times are GMT -7. The time now is 06:38 AM.