Remote start not telescoping wheel any fix?
#1
Driver
Thread Starter
Join Date: Feb 2009
Location: TX
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Remote start not telescoping wheel any fix?
I just recently got the Clifford 50.7x installed, I have not had it enough to play with it to give an opinion right now it seems nice however whenever I remote start the car the steering wheel does not telescope into place, is this something I can fix? Something the dealer did not install right? Any help?
Thanks.
Thanks.
#5
Advanced
iTrader: (7)
I have an sc so it might be different, but i had the same issue and all i did was wire up the 2nd acc, acc 1 controls ac and radio and stuff, the 2nd acc works tilt/telescope, memory seat functions and so on, could also be the keysense wire, if your doing this yourself or a pro install, the keysense wire is always overlooked, hope this helps, oh and i also have a python 990, 881xp, and python 991, and they were all the same...
#6
Driver
Thread Starter
Join Date: Feb 2009
Location: TX
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
No this was a pro install just not sure they knew of the telescoping wheel I called and they said just bring it back but I won't have time till this next weekend wwe are finishing the hatrdwire of the 700bt I got so I wqs hoping we could fix it while we are doing this. So we just need to hookup a keysense wire? Any diy you can lionk me?
Trending Topics
#9
Driver
Thread Starter
Join Date: Feb 2009
Location: TX
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Any chance yours works diff then the clif 50.7? Isn't the viper equiv model the 5901?
#11
Advanced
iTrader: (7)
No this was a pro install just not sure they knew of the telescoping wheel I called and they said just bring it back but I won't have time till this next weekend wwe are finishing the hatrdwire of the 700bt I got so I wqs hoping we could fix it while we are doing this. So we just need to hookup a keysense wire? Any diy you can lionk me?
#13
Lead Lap
iTrader: (22)
>>>>>>>>>>>>>>>>
why would you want the remote start to lower your steering wheel. The whole point of the telescoping steering wheel is to make it easier to get in and out of the car. I have remote start and when i get in i push the memory seat button and wheel goes down. This way it makes it more comfortable to get in the car.
Makes sense doesn't it??
Makes sense doesn't it??
#15
Lexus Fanatic
iTrader: (1)
why would you want the remote start to lower your steering wheel. The whole point of the telescoping steering wheel is to make it easier to get in and out of the car. I have remote start and when i get in i push the memory seat button and wheel goes down. This way it makes it more comfortable to get in the car.
Makes sense doesn't it??
Makes sense doesn't it??
EXACTLY, it's your choice of how you want your install to be done. If you want the steering wheel to telescope you should tell your installer beforehand because it is just a different installation. Doesn't mean your install was done incorrectly.
I'm 6'6" so I don't want to have to slide in under the wheel every time I remote start the car. Plus if I had to parallel park, my mirrors are still pointed down at the grown most of the time and I need to hit my memory button to reset them anyway.