To any/all RE AUDIO XXX owners......
#166
The Galahad cup holder came with 3 types of plastic hooks to hold to the vents or doors. Waiting for another member to sell his/her cup holder so I can place it in the rear vent center console.
Hope you get your money back from the battery box.
Pardon, what rca cables are you using? I just purchased Monster interconnect 401 XLN 4C 4-Channel RCA Audio Cable 13ft and Monster Cable 402 XLN XTREME Subwoofer RCA Interconnect on ebay.
Hope you get your money back from the battery box.
Pardon, what rca cables are you using? I just purchased Monster interconnect 401 XLN 4C 4-Channel RCA Audio Cable 13ft and Monster Cable 402 XLN XTREME Subwoofer RCA Interconnect on ebay.
i did get my money back but for some reason i now have 2 battery boxes (i reordered one and then i got the first one so i have to see if they charged me for it)
im using Stinger SPI6317 6 channel RCA's im bout to make a complete listing of parts i used
#167
Lexus Test Driver
iTrader: (2)
I actually tried a Poland spring water bottle and it worked fine. I was kinda able to use the directional part of the vent also. I just wanted them for show, so I looking for an empty liquor bottle(dress it up also) that can fit.
I remember someone posting a thread about speaker size and I didn't want to run into the same problem. Hopefully buying a pair 6.5 mdf rings (especially for the rear) would help.
I remember someone posting a thread about speaker size and I didn't want to run into the same problem. Hopefully buying a pair 6.5 mdf rings (especially for the rear) would help.
#168
ok so this is the COMPLETE list of parts i supplied to my audio place....
they had to make alot of custom panels and what not but this is what i gave them to install or that i installed
3 boxes of 10465 Bulk Dynamat
1 Yellow Top Optima (already installed)
50 feet of 0 gauge and bout 30 feet of 4 gauge wiring (they supplying this so actual lengths, i dunno but this is what i was quoted with) BTW YES, i know i have 3 sirius tuners in this list....im gonna see which one functions best with the alpine)
Gen 4 Nav Ecu
Custom Made Prestigious Society Nav Override Unit (To Enter Directions On The Fly)
Nav Tool EE0246 (bought from a group buy on here months ago 10/28/08 to be exact) https://www.clublexus.com/forums/clu...interface.html
KCA-SC100 Sirius Tuner
SIR-PNR1 Sirius Tuner
SCC1 Sirius Tuner
Stinger SPD5621 Power Distribution Block
Stinger SPD5202 Inline Fuse Holder
Stinger SPI6317 6 Channel Stereo Interconnect RCA's
Stinger SPD514 Power Distribution Block
Stinger SPT53303 Negative Battery Terminal
Stinger SPT53103 Positive Battery Terminal
Stinger SHDA1 Inline Fuse Holder (added Precaution on my alternator BIG 3)
Stinger SHDA1 Inline Fuse Holder (for rear battery)
Exonic EXR300 Rear View Camera (Installed in Keyhole)
Alpine VPA-B222 Vehicle Hub Pro (used to interface everything through the factory screen)
Peripheral Peswiakjc Steering Wheel Control Interface
Diamond Audio D662 Front Components
Diamond Audio D662 Rear Components
Diamond Audio DTK Aux Tweeter Kit (upgraded to the D662 tweeter and used in the ML in dash speaker)
RE Audio XXX 12" Sub
Orion HCCA25001 Amp (Powering The Sub)
Orion HCCA10004 Amp (Powering The Components)
Kinetik HC2400 Battery (In The Trunk)
Kinetik KMS-24 Battery Sleeve
Kinetik KHC-TP Power Top Posts
Iraggi 320 Amp Alternator
BIG 3 O Gauge Grounding Kit (With Extra Grounding Wires Cause I Had Extra Wires)
Power Acoustic PADVD-450 1/2 Din DVD Player
KCE-4221 Ipod-ALP-B Ipod Cable
CD-1B100 Pioneer Ipod Adaptor
I think this is a fairly complete list...of the supplied parts
im getting a custom box in the trunk with 1" thick plexiglass front. all panels holding the amps and crossovers with be flushed (im also trying to keep the spare tire in the car) my prestigious society remote and my remote for the alpine are being put into secret places ATM im not revealing where they going
stay tuned
they had to make alot of custom panels and what not but this is what i gave them to install or that i installed
3 boxes of 10465 Bulk Dynamat
1 Yellow Top Optima (already installed)
50 feet of 0 gauge and bout 30 feet of 4 gauge wiring (they supplying this so actual lengths, i dunno but this is what i was quoted with) BTW YES, i know i have 3 sirius tuners in this list....im gonna see which one functions best with the alpine)
Gen 4 Nav Ecu
Custom Made Prestigious Society Nav Override Unit (To Enter Directions On The Fly)
Nav Tool EE0246 (bought from a group buy on here months ago 10/28/08 to be exact) https://www.clublexus.com/forums/clu...interface.html
KCA-SC100 Sirius Tuner
SIR-PNR1 Sirius Tuner
SCC1 Sirius Tuner
Stinger SPD5621 Power Distribution Block
Stinger SPD5202 Inline Fuse Holder
Stinger SPI6317 6 Channel Stereo Interconnect RCA's
Stinger SPD514 Power Distribution Block
Stinger SPT53303 Negative Battery Terminal
Stinger SPT53103 Positive Battery Terminal
Stinger SHDA1 Inline Fuse Holder (added Precaution on my alternator BIG 3)
Stinger SHDA1 Inline Fuse Holder (for rear battery)
Exonic EXR300 Rear View Camera (Installed in Keyhole)
Alpine VPA-B222 Vehicle Hub Pro (used to interface everything through the factory screen)
Peripheral Peswiakjc Steering Wheel Control Interface
Diamond Audio D662 Front Components
Diamond Audio D662 Rear Components
Diamond Audio DTK Aux Tweeter Kit (upgraded to the D662 tweeter and used in the ML in dash speaker)
RE Audio XXX 12" Sub
Orion HCCA25001 Amp (Powering The Sub)
Orion HCCA10004 Amp (Powering The Components)
Kinetik HC2400 Battery (In The Trunk)
Kinetik KMS-24 Battery Sleeve
Kinetik KHC-TP Power Top Posts
Iraggi 320 Amp Alternator
BIG 3 O Gauge Grounding Kit (With Extra Grounding Wires Cause I Had Extra Wires)
Power Acoustic PADVD-450 1/2 Din DVD Player
KCE-4221 Ipod-ALP-B Ipod Cable
CD-1B100 Pioneer Ipod Adaptor
I think this is a fairly complete list...of the supplied parts
im getting a custom box in the trunk with 1" thick plexiglass front. all panels holding the amps and crossovers with be flushed (im also trying to keep the spare tire in the car) my prestigious society remote and my remote for the alpine are being put into secret places ATM im not revealing where they going
stay tuned
Last edited by sakataj; 05-19-10 at 12:49 PM.
#169
picked up my rental car, its a pontiac G6. airbag light came on like 5 minutes into driving it, yeah awesome
some pics of the doors before i sent here to the shop, took kyle and sams advice and finished the door although since i have to replace the drivers door accuator now so it seems silly
well, while car was in the shop i took sometime to work on some other unfinished projects,
i got my 7th session of work done on my chest (each session is about 3-4 hours)
i have about 2 or 3 sessions left. still have to do color on the left side top and then color on the right side lower and then on the top
pics from the audio shop
box being built....will be a plexiglass front (tuned to i think he said 32 hertz)
DVD Player mounted with nav tool being worked on in glovebox
Mike (in car) Alex Outside Of Car
Plates For Rear Speakers To Hold 6.5" Speaker And Tweeter
Wires In Trunk
Wires In Rear Seat
Mike Resoldering NavTool Plug
Alex (Left), Paul (Background), And Mike (Right) All 3 Are Working On My Car (all 3 are really, really good With OVER 22 years experience between the 3 of them)
STAY TUNED: STILL waiting on alternator. it was due thurs so i will have to email Dominique Monday and find out what the hold up is. you guys are REALLY gonna like what im doing with my remote/prestigious society remote. have to finish up my dynamat when i get the car back, still have the rear drivers door to do and the rest of the rear seat
picked up a new toy while im waiting to, gotta polish them up
some pics of the doors before i sent here to the shop, took kyle and sams advice and finished the door although since i have to replace the drivers door accuator now so it seems silly
well, while car was in the shop i took sometime to work on some other unfinished projects,
i got my 7th session of work done on my chest (each session is about 3-4 hours)
i have about 2 or 3 sessions left. still have to do color on the left side top and then color on the right side lower and then on the top
pics from the audio shop
box being built....will be a plexiglass front (tuned to i think he said 32 hertz)
DVD Player mounted with nav tool being worked on in glovebox
Mike (in car) Alex Outside Of Car
Plates For Rear Speakers To Hold 6.5" Speaker And Tweeter
Wires In Trunk
Wires In Rear Seat
Mike Resoldering NavTool Plug
Alex (Left), Paul (Background), And Mike (Right) All 3 Are Working On My Car (all 3 are really, really good With OVER 22 years experience between the 3 of them)
STAY TUNED: STILL waiting on alternator. it was due thurs so i will have to email Dominique Monday and find out what the hold up is. you guys are REALLY gonna like what im doing with my remote/prestigious society remote. have to finish up my dynamat when i get the car back, still have the rear drivers door to do and the rest of the rear seat
picked up a new toy while im waiting to, gotta polish them up
Last edited by sakataj; 05-01-10 at 07:52 AM.
#170
Lexus Champion
iTrader: (10)
Nice! don't tell me you are using stock speakers in the front!! get some SQ speakers as you no longer need high powered speakers. You just need clean,clear, and accurate...power is not "necessary" as you dynamat your whole ride. Something that really accurate and sounds good. send it the frequency it needs so that it doesn't play extra notes to allow less distortion so that it plays only those frequency. Sub doing sub frequency, mids doing only mids....etc... but u got the pro to take care of you on that.
Definitely upgrade those speakers. It's gonna sound awesome man!
Definitely upgrade those speakers. It's gonna sound awesome man!
#172
Lexus Test Driver
iTrader: (8)
Looks like its coming together, how exciting... As for the box, looks like its tuned closer to 35hz or higher. Box is pretty small and port is very small. (man I wish we had more space for woofer ) and did they use 1/2" wood? are they gonna at least brace it, cause with that powerful woofer, that box is gonna flex like a mother.
#174
Lead Lap
iTrader: (1)
Looks like its coming together, how exciting... As for the box, looks like its tuned closer to 35hz or higher. Box is pretty small and port is very small. (man I wish we had more space for woofer ) and did they use 1/2" wood? are they gonna at least brace it, cause with that powerful woofer, that box is gonna flex like a mother.
#177
Lexus Test Driver
iTrader: (8)
Agreed.. But because theres only one 12 on there... They have plenty of space to make a huge port Should have done at least 3" or 4" wide. The way it looks, due to teh small port, looks like a 'to factory spec' box keeping it tuned at like 36hz to peak at ~40ish. Doubt they're gonna do the L though cause the woofer is tall. IMO, it may be too shallow as it is. 4" from the back wall to the magnet is rule of thumb right? but the 1/2" wood is whats questionable still At least the baffle is doubled up
#178
Nice! don't tell me you are using stock speakers in the front!! get some SQ speakers as you no longer need high powered speakers. You just need clean,clear, and accurate...power is not "necessary" as you dynamat your whole ride. Something that really accurate and sounds good. send it the frequency it needs so that it doesn't play extra notes to allow less distortion so that it plays only those frequency. Sub doing sub frequency, mids doing only mids....etc... but u got the pro to take care of you on that.
Definitely upgrade those speakers. It's gonna sound awesome man!
Definitely upgrade those speakers. It's gonna sound awesome man!
lol, thanks mack
Looks like its coming together, how exciting... As for the box, looks like its tuned closer to 35hz or higher. Box is pretty small and port is very small. (man I wish we had more space for woofer ) and did they use 1/2" wood? are they gonna at least brace it, cause with that powerful woofer, that box is gonna flex like a mother.
Agreed.. But because theres only one 12 on there... They have plenty of space to make a huge port Should have done at least 3" or 4" wide. The way it looks, due to teh small port, looks like a 'to factory spec' box keeping it tuned at like 36hz to peak at ~40ish. Doubt they're gonna do the L though cause the woofer is tall. IMO, it may be too shallow as it is. 4" from the back wall to the magnet is rule of thumb right? but the 1/2" wood is whats questionable still At least the baffle is doubled up
i have one issue....seems noone makes steering wheel controls for our car? is this even true..... they said the ones i have wont work
oh, i bought the Peripheral Peswiakjc Steering Wheel Control Interface
Last edited by sakataj; 05-03-10 at 10:50 AM.
#179
well a little bit of a further delay.my Plexiglas is still in Nashville. the floods we got here the last few days have cause a delay in shipping. nashville got bout 22" of rain and we got like 19". my work got flooded. alternator STILL isnt here
we had bout 1 foot of standing water in our showroom and our bout 6" of standing water in our warehouse. the backroom of my house flooded
another part still hasnt come back from a outside company whose working on it. so another delay....im changing my component amp to this Orion HCCA10004 for a few reasons.
BTW GUYS: found out the box was made with 3/4" wood NOT 1/2" so thats good news
we had bout 1 foot of standing water in our showroom and our bout 6" of standing water in our warehouse. the backroom of my house flooded
another part still hasnt come back from a outside company whose working on it. so another delay....im changing my component amp to this Orion HCCA10004 for a few reasons.
BTW GUYS: found out the box was made with 3/4" wood NOT 1/2" so thats good news
Last edited by sakataj; 05-06-10 at 02:23 PM.