sakataj

iTrader: (182)

WOW seriously. thats double the power of the one i think im gonna end up with
http://www.pioneer.eu/eur/products/2...SPL/index.html

Emil

damn that's alot of dynamat from me again!
i've still got 3 sheet's left to use in the base of my trunk,and get the floor of my car done with more
also,get a capacitor,i'm running 2 amp's and no worries at all with it

sakataj

iTrader: (182)

actually....i dunno that im gonna need/use a cap. havent decided yet. gonna test under full load first

Emil

IMO,it'll be worth buying one anyway even if you don't get the lights dimming etc
i've had the same set-up for 3 car's now,the first car never had a cap,and it dimmed like mad,the 2nd didn't at first,and again dimmed like mad,once cap fitted it was fine,you've gone this far with the dynamat,might aswell go the whole way

sakataj

iTrader: (182)

DIDNT say im not gonna....said im gonna test first and see if i do

Emil

ah yes you did,i'm drained out sorry mate,still,i say you should

Spyder78

iTrader: (7)

I wouldn't do a cap. I would do either a Kinetic Battery or a Batcap battery, much better than caps and can usually be found for a similar price.

sakataj

iTrader: (182)

dont plan on it vlad but as i said im atleast probably go for another yellow top and then test and see if im having power issues

so i have talked with vlad bout this amp...

http://www.pioneer.eu/eur/products/2...SPL/index.html

anyone have any other preferences or info or suggestions?

SHiZNiLTi

So the Pioneer Premier PRS-D2000SPL does 2000rms @ 1 ohm and it sells for $535 BNIN... http://onlinecarstereo.com/CarAudio/...roductID=21081

What's your 12" RE XXX subs voicecoil configuration? this is very important.

Also do you mind taking a pic of the sub next to your wheel or something, I wanna see that meaty basket and magnet structure?

sakataj

iTrader: (182)

hey shiz i dont even know your name btw....im brian and seriously can/will you build me a box?

i can get that amp for cheaper

http://techronics.com/index.cfm?fuse...7619&aff=72182

but vlad was talking about a few others....im fairly clueless as my friends own the audio shop but im hunting for advice/suggestion from you'll on here
my sub's voice coil configuration is 2 OHM. i will take those pics for you soon but i will post a few teasers right now

will show u pics by my tires tomorrow

sakataj

iTrader: (182)

ok so i stumbled on this...

http://www.woofersetc.com/p6986/T15K...-Amplifier.htm

WTF man....jeeze that huge

anyways as you requested shiz....here are the pics. and yes it weighs EVERY bit of the 72 lb they said it does (pics suck, i broke my s5200 fuji so im using my iphone)








so talking with vlaD I think i have settled on this so far

MD-3D amp

http://usamps.com/md_amps.html

hc2400 battery

http://www.amazon.com/Kinetik-HC2400.../dp/B000LUDEQ6

if thats not enough im gonna try this (dont wanna but might have to)

alternator
http://powerbastards.com/proddetail....od=Fitzall-220

I.B.dAt.Fo

iTrader: (8)

that thing is huge! and i thought my mtx 9500 was huge compared to my w6v2. your car's rear is gonna be super low when you have everything in for sure hahah

sakataj

iTrader: (182)

thats what she said

i know. I'm gonna have to figure out my suspension after this build as i will have several hundred extra pounds in there

UpstateLex

Big Mack is the shhhh

sakataj

iTrader: (182)

um ok and thanks for adding nothing to this topic...


so i have decided now on the md-3d and the hc2400 for sure. still working out my box design....
stay tuned