When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Some great looking cars there. I especially love the ones with the scrapes on the bottom of the bumpers. This proves to me that a car is being driven on a regular basis.
We both drove down from NorCal along with Solos LS430 and UV's Sharpie IS350
Thanks for the great shots. Too bad we didn't get to meet as I've always admired your work.
Next time.
glen....is that koyo custom made or is it actually made to fit the gs v-8? or did you just measure them and buy one thats close. you running flex-a-lite fans on it?
to all the people whose cars are on here....way guys nice job. way to represent
glen....is that koyo custom made or is it actually made to fit the gs v-8? or did you just measure them and buy one thats close. you running flex-a-lite fans on it?
to all the people whose cars are on here....way guys nice job. way to represent
Hey Brian,
it's a TT radiator with the lower mounting pins re-located & welded to align with the OEM rubber bushings The top brackets were custom made since this radiator is taller and spacing is wider. I did use dual flex fans, plus added an overflow tank and stand alone tranny cooler since this radiator is for a stick. Sorry no plug and play if that's what you were looking for.
Hey Brian,
it's a TT radiator with the lower mounting pins re-located & welded to align with the OEM rubber bushings The top brackets were custom made since this radiator is taller and spacing is wider. I did use dual flex fans, plus added an overflow tank and stand alone tranny cooler since this radiator is for a stick. Sorry no plug and play if that's what you were looking for.
i was hoping glen.... oh well thanks. car still looks great. are those LED'S underhood on the bottom side of the hood? any reason you removed the factory insulation on the hood?
i was hoping glen.... oh well thanks. car still looks great. are those LED'S underhood on the bottom side of the hood? any reason you removed the factory insulation on the hood?
Yup those are temp LEDs, until I install my CF hood and mold them in. I removed the insulation to clear the battery. I mounted mine higher than stock in order to get clearance for the wiring.