dejavu157

iTrader: (2)

i had the same debate and was satisfied with my pic. LEDs. makes your car look years newer

EN_VY

Make sure you get nice LED lights... Some light up with an ugly square pattern, or dont even light up when you brake... Me, I stick with the oem 01-05 tails. Looks better in pattern although led 01-05 ones would be cool

a#'z

Yeah i agree LED ftw, like me.

Mr Jokster

iTrader: (8)

Yup, LED's for the win!!! and as EN_VY said and is VERY important, do not get the cheap looking squared off LED's they are VERY ugly!!! I too had the debate, settled on LED's and took a while before I found a good set which are the Insurance tails. I believe I saw a set of LED's on Ebay that actually have a very close look to stock with the same shape, however dont know how bright they are.


Junction Produce has to do their lazer grafting of the stocks and make them LED's (probably sell them for like $2500 though )

4double0

iTrader: (1)

Thanks everyone for the input. I had LEDs and loved the way they looked, but the lamps started blowing fuses. What do the insurance tails look like and do they come with inners and resistors. Here is the ones I purchased fro JZS international, Japan on ebay.

GS300ToM

iTrader: (32)

looks fresh man......u got pmed

4double0

iTrader: (1)

thanks,

I need to find a new set soon. The stock tails or killing me lol

Mr Jokster

iTrader: (8)

These are the insurance ones. You blew the led's on these? How long you have them on before they blew? I've had mine on for a minuet and havent had any problems and the black gel boxes that come with them act as the resistors.

4double0

iTrader: (1)

Really,

I purchased them a year ago, and installed them this month when I put my kit on, drove around about a week and realized that I didn't have tail-lamps just brake lights. Replaced the fuse for the tails and switched the resistors from one side to the other which seem to work until I blew the stop fuse. The stop fuse prevented me from getting my car out of park(scary lol).
Mr. Jokster did your dash light come on? mine did.
Here is another pic compared with stock:

GS300ToM

iTrader: (32)

http://bananags.grantham-internation...le_brake_warn/

this shud help

vipjason

iTrader: (6)

jp would be nice if your a baller..... just stick with the led

GS300ToM

iTrader: (32)

is some of your right inner led are out??

4double0

iTrader: (1)

I looked at that also, but in person the inners was the same on both sides, so if figured it was supposed to look like that.

sakataj

iTrader: (182)

x2 but didnt JP make some NON led lights?

OR you could get 2001+ lights and add LED's to them like jackson and i did

yeah good luck getting that lens off without cracking it

4double0

iTrader: (1)

Mr. Jokster,

I didn't blow the LEDs. The LEDs blew two fuses that was located on the driver-side foot well.