Replacing factory sub
01-12-10, 06:17 AM
#1
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: Nov 2009
Location: New York
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Replacing factory sub
Hey guys. Have any of you replaced the factory sub with an 8" jl sub? If so what kind and how difficult was the install? Thanks
01-12-10, 06:40 AM
#2
Well, the stock sub is 10"... so I feel pretty confident I can field this one for the entire community.
No. Nobody has put in an 8" JL sub.
Many members have replaced it with 10" subs of their particular taste. Including, upgrading the stock sub to 12", building enclosures around the 10" hole, or putting a "free-air" IB sub in there. Either route you choose, upgrading the amp is a good idea also while you're at it.
No. Nobody has put in an 8" JL sub.
Many members have replaced it with 10" subs of their particular taste. Including, upgrading the stock sub to 12", building enclosures around the 10" hole, or putting a "free-air" IB sub in there. Either route you choose, upgrading the amp is a good idea also while you're at it.
01-13-10, 09:36 AM
#3
Well, the stock sub is 10"... so I feel pretty confident I can field this one for the entire community.
No. Nobody has put in an 8" JL sub.
Many members have replaced it with 10" subs of their particular taste. Including, upgrading the stock sub to 12", building enclosures around the 10" hole, or putting a "free-air" IB sub in there. Either route you choose, upgrading the amp is a good idea also while you're at it.
No. Nobody has put in an 8" JL sub.
Many members have replaced it with 10" subs of their particular taste. Including, upgrading the stock sub to 12", building enclosures around the 10" hole, or putting a "free-air" IB sub in there. Either route you choose, upgrading the amp is a good idea also while you're at it.
well said actually.
Thread
Thread Starter
Forum
Replies
Last Post
tuterz
Lexus Audio, Video, Security & Electronics
1
09-13-09 12:04 PM
