Mr Jokster

iTrader: (8)

Ok not necessarily exhaust... I want some sick exhaust tips for the rear of my car and LOVE the JP exhaust, however I find it to be quite pointless and a waste of money to spend $1k+ for exhaust when you dont want any sound. I love exhaust, but not for my GS So anyways I'm doing what a few have done and buying an exhaust tip to weld on to my stocker. I've also found that its pretty impossible to find the proper angled tip, but ran across this and I'd like to find out from those who know, isnt this a pretty darn close angle to what I'm looking for? Yes I'm aware that this is a crimp on type tip, but I'm gonna have a friends muffler shop chop it and weld it on (if its possible of course) but before spending this kind of money I want to get some feedback to make sure this looks right, thanks for the help folx

Mr Jokster

iTrader: (8)

Oh forgot to ask most important question... What is the diameter of the JP exhaust tip? Is it 4" or 5"? thanks.

Mr Jokster

iTrader: (8)

Wow, didnt realize how hard of a question I asked

Just want to know if this has the same slant of the JP exhaust? thanks.

Caoboy

iTrader: (2)

That looks good, where did you find it?

5t341th

iTrader: (16)

i used 3.5" tips on mine. if i did it again, i would get the 4" and cut the angle down to 30 degree angle.
real jp is like 5". i saw it on chrispy's car and its huge

Mr Jokster

iTrader: (8)

about a week or 2 of countless searching through 14,000 exhaust tips on ebay! Last night I ran across them and WHEW! I was so excited... I hope its not a waste of money when I get them However, once I got the model number of them I did what I usually do... Googled it to see if I can find it cheaper else where, and I did gonna save about $15 bucks on both through amazon. But looks like they only have 1 also am waiting for confirmation... I also found another one that has a 3" inlet 4" outlet (instead of 3.5" inlet 4"outlet like this one) for $10 bucks less each, gonna see if I can do those instead to save a buck. My bud is gonna chop off the back and butt it up to the chopped stocker and with a little cleaning it should look just like the JP


nope the exhaust cutouts on the GS kits are 5" alone and muffler shops always say you gotta have a 1/2" clearance on each side. If you look at Chrispy's bumper, theres clearance on both sides I was at my buds shop today and saw a 4" and man its pretty big. I'm currently awaiting a reply from he whom I sent a message in regards to measurements

Mr Jokster

iTrader: (8)

Heres a better pic of it, this is the one with the 3" input:

Anthony

iTrader: (4)

yea but you have to remember chrispy has an aftermarket rear bumper so the cut outs are larger, so it may be 5"

I hope you get the tips man, ive been contemplating on doing the same like 5t341th did , since i dont really want mine loud also

Mr Jokster

iTrader: (8)

I too have an aftermarket kit. Measures 5 inches. and i'm sure there are many who have ran this with stock kit. IDK, 5" seams so massive...

CPMD

iTrader: (2)

I like it a lot bro I might have to pick one up as well

P.S. That's a lot of exhausts you were going through on the bay!

Mr Jokster

iTrader: (8)

You just dont know man! Hard to find that perfect angle on just a tip. But when it comes to doing something right... Gotta do the research (wish I did that when I chose my rims LoL)

CPMD

iTrader: (2)

I hear you bro I'm the same way, but sometimes it's so hard to pick just one

Mr Jokster

iTrader: (8)

yup. I gave up when looking for rims... When the guy brought out so many rim catalogs (about 4 feet wide worth) I said eff it! LoL well actually I found a sweet custom set, but didnt want to wait 4 months for them, so after a month I settled for what he had sitting there. (shame on me)

5t341th

iTrader: (16)

im pretty sure chrispys tips are 5"
i have 3.5, my frend has 4
his was bigger than both of ours

but then chris can come in here and confirm tho

chrispy

iTrader: (21)

I'll measure it when I can. I'm pretty sure it's a 4 inch tip but the extensions are a little bigger. Possibly 4.5. It also looks bigger because it's angle cut and single walled.