radio wire harness/factroy amp bypass ??
02-17-11, 12:05 PM
#16
I have a 99 GS3 and I installed a sony xnv 770 nav unit. I couldnt find a harness so I had to wire it up myself.
I hardwired/soldered the sony harness to the factory radio harness. I bought a multimeter, solder gun, speaker wires etc at the pawn shop for $23. I ran new speaker wires and bypassed the factory amp. I just used the speaker wires on the amp harness going out to the speakers temporarily until I get serious.
Everything works perfect, and sounds way better. When I first learned I had to hard wire, I searched this forum and google for about half hour. I found some good info that should of been stickied, but I cant find it now
Ill post up if I find the links again.
I hardwired/soldered the sony harness to the factory radio harness. I bought a multimeter, solder gun, speaker wires etc at the pawn shop for $23. I ran new speaker wires and bypassed the factory amp. I just used the speaker wires on the amp harness going out to the speakers temporarily until I get serious.
Everything works perfect, and sounds way better. When I first learned I had to hard wire, I searched this forum and google for about half hour. I found some good info that should of been stickied, but I cant find it now
Ill post up if I find the links again.
02-20-11, 12:46 AM
#17
Driver School Candidate
Join Date: Feb 2011
Location: CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
https://www.clublexus.com/forums/lex...ration-gs.html
that link is very helpful. i sort of did what he did. gl
that link is very helpful. i sort of did what he did. gl
Thread
Thread Starter
Forum
Replies
Last Post
TrboDANDEE
Lexus Audio, Video, Security & Electronics
0
02-18-04 10:17 PM
