When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
wow nice work vu. u so cool.
now get a buffer machine and some polish.
should make it nice and shiny
but u'd have to polish it every time u wash ur car. or else it gets dull.
or u can polish it and then clear coat it
I've seen a thread about it. There was this guy with a white 2GS, and he was asking about how to remove these.
As far as I remember it sits tightly on clips, so pulling on it gently would work.
But before you do, just make sure it really is so!
I actually have the same intention, because the paint has started to come off off of one side already, so subscribing to this thread, we'll see what other say!
Wouldn't it rust or anything once stripped, or should it be treated with some sort of lacquer?
Thank you!
Originally Posted by LtunedG
i think i remember reading that thread and i think what happened was someone was getting their roof painted black and they taped over those pieces and then when the tape was removed, the chrome look came from under that tape
If you wet sand it down with say like 1000 grit, it wont rust (i did this to my exhaust, hasnt rusted). You can polish it with a polisher and then spray some clear coat on it. you cannot polish something to become chrome, to get chrome u gotta use chemicals.
the chrome sticker way sounds like a good idea, where do they sell it long enough for the whole molding?
08-16-10, 02:57 PM
