Wheel width/offset/size and tire fitment Q&A thread
#152
Driver School Candidate
Join Date: Oct 2011
Location: SA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone gimme advice on if this is suitable for my stock 03 is300?
im looking at 19" BBS RGR's
19x8.5 +38 offset near new 235/35R19
19x9.5 +38 offset near new 265/30R19
will these need spacers and will it look flush?
cheers
im looking at 19" BBS RGR's
19x8.5 +38 offset near new 235/35R19
19x9.5 +38 offset near new 265/30R19
will these need spacers and will it look flush?
cheers
#153
Driver School Candidate
Join Date: Mar 2010
Location: NY
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
I need a little advice on this one guys. I been searching but I can't find a concrete answer on this one:
20" XXR 526's
20x9 +15 F
20x11 +15R
What do you think will need to be done to make these fit? I'm going to have coilovers but my drop is only going to be either equal to or a scosche lower than the DF210s. As for tires I was thinking of running 225/35 up front and maybe 255/30 in the rear. Any input?
20" XXR 526's
20x9 +15 F
20x11 +15R
What do you think will need to be done to make these fit? I'm going to have coilovers but my drop is only going to be either equal to or a scosche lower than the DF210s. As for tires I was thinking of running 225/35 up front and maybe 255/30 in the rear. Any input?
#155
Driver School Candidate
Join Date: Oct 2011
Location: QLD
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Hey Guys,
I'm looking into getting a set of Varrstoen 1.1.2's, but their new sizing is wack.
They offer a 19x9.5 in +22 and +12, and a 11 in +25 and +15.
I really want the staggered dish that the 11 will offer, So im opting for a 9.5+22 front and a 11+25 rear. Tyre wise i will try stretch a 245 on the rear and a 225 will fit fine on the front.
With the rear gaurds, what mods will i have to do? I know you speak about "shaving" what does this refer to? how intense will i have to flare the rears? Has anyone on here got any pics of a GS running similar offsets?
Also, car will be low low low.
I'm looking into getting a set of Varrstoen 1.1.2's, but their new sizing is wack.
They offer a 19x9.5 in +22 and +12, and a 11 in +25 and +15.
I really want the staggered dish that the 11 will offer, So im opting for a 9.5+22 front and a 11+25 rear. Tyre wise i will try stretch a 245 on the rear and a 225 will fit fine on the front.
With the rear gaurds, what mods will i have to do? I know you speak about "shaving" what does this refer to? how intense will i have to flare the rears? Has anyone on here got any pics of a GS running similar offsets?
Also, car will be low low low.
#156
Instructor
iTrader: (16)
I need a little advice on this one guys. I been searching but I can't find a concrete answer on this one:
20" XXR 526's
20x9 +15 F
20x11 +15R
What do you think will need to be done to make these fit? I'm going to have coilovers but my drop is only going to be either equal to or a scosche lower than the DF210s. As for tires I was thinking of running 225/35 up front and maybe 255/30 in the rear. Any input?
20" XXR 526's
20x9 +15 F
20x11 +15R
What do you think will need to be done to make these fit? I'm going to have coilovers but my drop is only going to be either equal to or a scosche lower than the DF210s. As for tires I was thinking of running 225/35 up front and maybe 255/30 in the rear. Any input?
https://www.clublexus.com/forums/gs-...cs-inside.html
Last edited by tiger4life; 10-29-11 at 07:06 PM.
#157
Driver
iTrader: (3)
Join Date: Jan 2010
Location: CA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Hey Guys,
I'm looking into getting a set of Varrstoen 1.1.2's, but their new sizing is wack.
They offer a 19x9.5 in +22 and +12, and a 11 in +25 and +15.
I really want the staggered dish that the 11 will offer, So im opting for a 9.5+22 front and a 11+25 rear. Tyre wise i will try stretch a 245 on the rear and a 225 will fit fine on the front.
With the rear gaurds, what mods will i have to do? I know you speak about "shaving" what does this refer to? how intense will i have to flare the rears? Has anyone on here got any pics of a GS running similar offsets?
Also, car will be low low low.
I'm looking into getting a set of Varrstoen 1.1.2's, but their new sizing is wack.
They offer a 19x9.5 in +22 and +12, and a 11 in +25 and +15.
I really want the staggered dish that the 11 will offer, So im opting for a 9.5+22 front and a 11+25 rear. Tyre wise i will try stretch a 245 on the rear and a 225 will fit fine on the front.
With the rear gaurds, what mods will i have to do? I know you speak about "shaving" what does this refer to? how intense will i have to flare the rears? Has anyone on here got any pics of a GS running similar offsets?
Also, car will be low low low.
#158
Driver School Candidate
Join Date: Oct 2011
Location: QLD
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Cool cool, what's the easiest way to get camber out of them? I'm new to toyotas (im used to nissans and adding a set of 200 dollar camber arms to fit wheels) i understand it isnt that easy with these haha. What's the max camber you can get with stock arms? It adjusts from the bottom right?
#159
Moderator
iTrader: (5)
Join Date: Aug 2007
Location: Philly...Born and raised
Posts: 2,834
Likes: 0
Received 1 Like
on
1 Post
Cool cool, what's the easiest way to get camber out of them? I'm new to toyotas (im used to nissans and adding a set of 200 dollar camber arms to fit wheels) i understand it isnt that easy with these haha. What's the max camber you can get with stock arms? It adjusts from the bottom right?
#164
im getting xxr 526 18x9F &10.5R with 215/40 front and 245/40 rear but my main question is... How are the Nanking NS-2's. i feel like im rushing by buying cheap. Should i wait or are the ns-2's actually not bad? Thanks for the help guys