When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
hey everyone, im looking at buying a set of Work Eurolines, however, they are interstate and therefor i cannot test fit them, the fronts measure in at 19x9 0 offest, and the rear 19x9 -3 offset.
Can someone show me a picture of another 2gs with similar setup or tell me roughly how far out the guard will the wheels sit.
hey everyone, im looking at buying a set of Work Eurolines, however, they are interstate and therefor i cannot test fit them, the fronts measure in at 19x9 0 offest, and the rear 19x9 -3 offset.
Can someone show me a picture of another 2gs with similar setup or tell me roughly how far out the guard will the wheels sit.
To give you some kind of idea here's my boy's setup: 19x9 +15, 19x10 +10
His font +15's could def use a 10mm spacer. If you look on the second pic I posted and zoom in on his car (very first car) you'll see it's pretty sunk. IIRC, his camber settings are still factory specs.
And good luck fitting those -3's! If there's a will there's a way...
EDIT: I just realized you said 19x9 -3, that should fit fairly easy, just be sure to shave/roll fenders all around
hey everyone, im looking at buying a set of Work Eurolines, however, they are interstate and therefor i cannot test fit them, the fronts measure in at 19x9 0 offest, and the rear 19x9 -3 offset.
Can someone show me a picture of another 2gs with similar setup or tell me roughly how far out the guard will the wheels sit.
That'll fit no problem, roll and shave. The front will naturally pull itself out, just dont turn too sharp