DanielW

Few minutes on the forum and already questioning

Want to get a new set of wheels for my car, Aristo V300 ( 2ND gen Gs300)

The wheels i`m talking about are the Varrstoen 3.3.1. The offest choices are really confusing me allot. and i am looking already for days whitch offset would be fitting perfect on my car.

The offset that they give for the 19 inch wheels are. 19x9,5+22 front and 19x10,5+22 rear

So will this fit slightly under my car whit a bit off fender roling in the frond and back of the car. And will it clear whit the D2 8 pod BBK ?

I think you guys can help me out whit the do and dont`s

Car mods are:

D2 coilover kit
D2 8pod BBK

outareach

ok I've been reading for days trying not to step on to many toes and get the anwsers needed.... Im looking for a couple simple anwsers. Why does everybody run a wider rear tire. This is what I'm looking to do......

Tanabe df210........ 2''drop

19x8.5 38mm offset all the way around. 245/35/19 tire.


Pros?? Cons??? modifications???

I know I know.... Beaten to death. Alot of you guys have been on here for years and are tired of it, but I'm not a trust fund baby and I work for everything I got so i cant really afford to do it wrong and go back and do it again....... Thanks all...... If you guys wont respond I'll just start a new thread asking if this will work.....hahahaha just joking.....

solowlex

The reason for a different size tire is because they get rims that are "staggered", meaning that the front could be 9.5 and the rear wheel could be 10.5. When people run 9.5 up front they run a 225/35/19 and when people run a 10.5 in rear they run a 245/34/19. Some people like there tires "stretched' and some people like them not "stretched".
-with a 245/35/19 on a 8.5 that will not be stretched AT ALL.
google some images lexus GS with the size tire and rims size you are going to run. it will show you what it will look like.
In my opinion i think you should go a little bit more wider up front AND in the rear. i would suggest a 9.5 up front and a 10.5 in the rear. offsets around +22. Just remember...Google imags is your best friend.

VINCE9164

iTrader: (14)

19x9 +24 225/35/19
19x10 +0 235/35/19

what fender mods are needed for this? what kind of negative camber should I expect? Thanks

solowlex

I think i know what wheels your looking at...haha

Acer

iTrader: (3)

19x11 +0 offset how much fender work needed for front and rear fenders?

outareach

ok I understand what staggered is but i was wondering if it was a performance thing or a look thing. I've scowered the net and the forums and I cant seem to find anybody rocking straight 19x8.5 w/ 38mm offset. seems I can only find the staggered set up. I used the link provided earlier in the thread and it looked like the 38mm offset was sunken like a champ. If anybody is using this set up can you please provide pics and details. I've used a bunch of those rim simulators and I think I like the kv5's but the simulators r crap.......Its time for me to make a decision. If I do decide to go w/ the above stated rim will the df210 cause rubbing??? Thanks all.... u guys r gonna have to pull me through this kicking and screaming........

Acer

iTrader: (3)

anyone?
......

sinistervr

iTrader: (1)

fronts will fit fine, rear will need a small pull

sinistervr

iTrader: (1)

i have jdm fenders which are 10mm wider from my understanding and i pulled them to fit a 10+9, so your 3 mm more aggressive, gunna need pull all around and a decent amount of it

SteveORT

iTrader: (1)

Any camber taken out??

ALowGS

iTrader: (3)

Looking to run 19X9.5 +30 and 19X10.5 +30, 235/35/19 and 265/30/19 tires, lowered on df210's with roll front and rear. Only want to run -2 camber at most. Anyone see any issues or rubbing?

yoitskenn

iTrader: (4)

I have a stock 2001 GS3
Looking to throw some 18x9 +30 All around
rear 265/35
front 235/35
Looking to get some Meganz

Will i need any fender work? and if so, how much.

Sevenevez

iTrader: (2)

maybe a shave to the rears.

drifting

What about on 20" wheels? What's the widest I can fit in thr rear of my 2000gs and what offset will will I need.. I'm buying some 20" off a Mercedes that need to be drilled to fit mine. I was concerned on fitment. Any help.please.