982jzge805

My tilt has completely stopped, moves in and out, but no more up and down.

Any good threads, for 2nd gen GS300?
Thanks.

1LUVHQ

kGhost

Any updates on this? This just happened to me this morning...

KG

svt5150

Your motor is most likely bad. Mine does the same thing right now. Drives me crazy. I have a new motor, haven't installed it yet. Mine goes in and out but not up and down. You can search but I also read some WD40 might work and a cleaning of the original one. I will try that first.

sakataj

iTrader: (182)

DONT USE WD-40....use white lithium grease

LexiBlue

iTrader: (2)

lithium grease gets hard and bittle after whlie though just saying

sakataj

iTrader: (182)

some grease does get hard/brittle some dont....

BTW yeah your right,thats why the car leaves the factory with wd-40 around the metal bearings. oh wait it doesnt, it leaves with a grease coating.

srt007

i wouldnt recomend wd-40 either.
its supposed to take grease on there. the motors can go bad but most of the time they need to be lubed up

CptCrunch

iTrader: (1)

hey I did this on my SC300 and it works wonders! wouldn't hurt to try.


https://www.clublexus.com/forums/sc-...ng-repair.html