yea at pin 1 and 2 at the plug thats on the TCM end

 

still driving around in limp mode ...i purchased a 300$ throttle control motor and NOTHINGGGGGG

 

I'm not trying to insult you, but you might want to take it to a trained professional. Here you said the TCM was reading 0. I asked you if you checked it the way the manual tells you and you said yes. In your other thread a poster posted the procedure and then you said you didn't get zero. JUST DON'T WANT TO SEE YO KEEP THROWING MONEY AT THIS PROBLEM. I told you before I didn't think the tcm was the problem. If I had to guess, I would fault the ecm possibly at this point, but a lot of things can cause limp mode.

Is the car idling fine?

 

yes the idle is fine... im returning the TCM tomorrow and ordering the pedal position sensor idk what else to blame

 

FrankT, gave you instruction step by step from the manual from your other thread.. Use it wisely.

 

I would check the resistance of the app before you buy a new one unless your source as a generous return policy.

 

i will triple check it in the morning..

 

returned the TCM today and ordered the lever assembly w/pedal position sensor .. get it tomorrow hopefully that fixes the problem.

 

where did you order the lever assembly? im shopping around for one atm. hope to see you resolve the issue.

 

Replaced the lever assembly and NOTHING STILL IN LIMP MODE f*** it selling the car for 2500

 

FrankT gave u the procedures to check the component so u didnt have to play the change the part game

 

Gs4-fiend I tried the procedure and got nothing only sensor that didn't return results and I swapped it and nothing was the throttle control motor

 

just bring the car to a professional and pay them $100 to tell you what's wrong with it. sometimes we can't do it ourselves.

 

took it today and the mech told me the ecm has to be reprogrammed to read n detect the new parts that were installed .. TPS / APP

 

Good guess by me