Installed lTSPNY 6k lows / 3k fogs and V-LEDS 6k 194 LED City Lights l Epikeddie's GS
12-07-11, 11:59 AM
#1
Rookie
Thread Starter
Join Date: Mar 2011
Location: CA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Installed lTSPNY 6k lows / 3k fogs and V-LEDS 6k 194 LED City Lights l Epikeddie's GS
Hi guys!
I read up a lot of good info on changing out the lights and figured that I would post up some before and after photos of my experience. I still have the V-LEDS DRL 9005 HB3 LED Bulbs coming in for the DRLs with the modules so I'm not quite done yet. But here's what I have done so far......
Started with those pesky parking lights.....V-LEDS 6K White 68 LED 194 Bulbs
http://www.v-leds.com/Exterior-LED-B...94378-1-2.html
Once I finished up the parking lights, I noticed that fog lights looked boring so in went some TSPNY 3000K 9006 HID fog lights......
Starting to come along nicely with the other side in......
Once I was done with the LEDs and fog lights, I thought the low beams weren't bright enough anymore...... some TSPNY 6000K 9006 HID low beams were desperately needed.....
The final result.......
Thanks for all the help on getting this done guys! CL rocks!
I read up a lot of good info on changing out the lights and figured that I would post up some before and after photos of my experience. I still have the V-LEDS DRL 9005 HB3 LED Bulbs coming in for the DRLs with the modules so I'm not quite done yet. But here's what I have done so far......
Started with those pesky parking lights.....V-LEDS 6K White 68 LED 194 Bulbs
http://www.v-leds.com/Exterior-LED-B...94378-1-2.html
Once I finished up the parking lights, I noticed that fog lights looked boring so in went some TSPNY 3000K 9006 HID fog lights......
Starting to come along nicely with the other side in......
Once I was done with the LEDs and fog lights, I thought the low beams weren't bright enough anymore...... some TSPNY 6000K 9006 HID low beams were desperately needed.....
The final result.......
Thanks for all the help on getting this done guys! CL rocks!
12-07-11, 01:00 PM
#5
Rookie
Thread Starter
Join Date: Mar 2011
Location: CA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys....great info here and the install wasn't too bad with all the advice....
My advice...take your time and don't force anything. If you hit a wall, then step away and take a break....come back when you're not about to break your $40 LED bulbs lol
My advice...take your time and don't force anything. If you hit a wall, then step away and take a break....come back when you're not about to break your $40 LED bulbs lol
12-07-11, 01:58 PM
#7
Rookie
Thread Starter
Join Date: Mar 2011
Location: CA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
12-07-11, 02:21 PM
#8
Former Sponsor
12-07-11, 02:39 PM
#9
Rookie
Thread Starter
Join Date: Mar 2011
Location: CA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Do you guys retrofit the Q45 projectors?
I might be interested in using services plus the other goodies like the LED turn signals and etc. You have a PM coming your way!
I might be interested in using services plus the other goodies like the LED turn signals and etc. You have a PM coming your way!
12-09-11, 02:33 PM
#15
Rookie
Thread Starter
Join Date: Mar 2011
Location: CA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Here's how the new 6K 9005 DRL LEDs look!
I'm pretty done with lighting mods for now as I can see this can get a little out of hand. I did order new lower ball joints and new Daizen bushings since I'm planning to change up the stance pretty soon......