Clicking sound when braking
#2
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have a clicking from my passenger side as well but I have narrowed it down to my wheel bearings. Are you sure it is only when your braking? Braking does make mine louder due to the stress it adds to the bearings while stopping I assume.
I left the car off and put in neutral and rolled it about 10 ft to figure it was my bearings.
I do remember something about the clips on the brakes causing issues but can't remember exactly.
I left the car off and put in neutral and rolled it about 10 ft to figure it was my bearings.
I do remember something about the clips on the brakes causing issues but can't remember exactly.
#3
Driver
iTrader: (2)
Join Date: Dec 2006
Location: WA
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Would you be more descriptive on the clicking? Year and mileage of your car? Any idea on how your suspension and chassis parts are doing (like ball joints)?
the one instance i had clicking was my front drivers rotor was ever so slightly shifting when braking right after shifting into reverse or into drive from reverse, if that makes any sense. I used to torque down both my stock and aftermarket wheels to 75 ft/lb. I now torque them to 80 and that made my rotor shifting go away.
Edit: This is all after replacing my lower ball joints and using new rotors
the one instance i had clicking was my front drivers rotor was ever so slightly shifting when braking right after shifting into reverse or into drive from reverse, if that makes any sense. I used to torque down both my stock and aftermarket wheels to 75 ft/lb. I now torque them to 80 and that made my rotor shifting go away.
Edit: This is all after replacing my lower ball joints and using new rotors
Last edited by deejay; 02-12-12 at 10:25 AM. Reason: incl. the fact that this was after doing my ball joints
#4
Driver School Candidate
Join Date: May 2011
Location: PR
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
If you narrowed the sound to the calipers, it might be that the clips that hold the pads are kinda loose and when you hit the brakes it causes the pad to travel up or down the mount thus causing sound. Or maybe the sliders pins on the caliper are seized(out of lubrication), that happened to me and its no fun, i had to buy a new caliper bracket because one of the pins was welded in the hole from all the heat it took and i could not take it out, instead i broke it off leaving the part useless.
#6
Pole Position
Join Date: Jan 2012
Location: Little Saigon, SoCaLi
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Clunking sound happen when over, speed bump, slow left/right turning, stop and reverse while turning, and especially around Orange County CA, in Little Saigon where we have a lot of major intersection when groved for channeling rainwater to the drain/ocean. I heard it all LOL
surprisingly I only replaced Lower Ball Joint and all fours struts with KYB GR-2 and all the cluncking went away expect for one. That is stop and reversing. I think it is the brake pad aligning with the front right rotor. I haven't bother with the wheel bearing yet. (and only the front right/passanger corner) You can read all about clunking noise all over the forum and theories. Oh I almost forget, I have to put back on the original two front strut mounts. Cause KYB strut mount was contributing to the clunking and I can't return it to KYB outlet. Worst internet buying experience ever. "Just Suspension.Gone" The price is good but the service is somewhat in need of improvement.
![Crying](https://www.clublexus.com/forums/images/smilies/Peace.gif)
Last edited by GS714; 02-12-12 at 08:23 PM. Reason: spelling and grammer check LOL
#7
Driver School Candidate
Thread Starter
Join Date: Jul 2010
Location: MD
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
The car is a 99 GS400 with about 147k miles on it. I purchased the car about 18 months ago. The previous owner who had it about 6 months said he changed the ball joints. So I hope thats not it. Im not hearing the sound when going over bumps only when I hit the brakes hard. If I press the brakes slightly I wont hear it.
Trending Topics
#8
Pole Position
Join Date: Jan 2012
Location: Little Saigon, SoCaLi
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
The car is a 99 GS400 with about 147k miles on it. I purchased the car about 18 months ago. The previous owner who had it about 6 months said he changed the ball joints. So I hope thats not it. Im not hearing the sound when going over bumps only when I hit the brakes hard. If I press the brakes slightly I wont hear it.
https://www.clublexus.com/forums/sus...and-facts.html
https://www.clublexus.com/forums/gs-...w-turns-2.html
There are lot of info in here. Just don't rush into spending money spree. I am new in here too BTW. If I may. check your caster/trailing arm and all bushing first. I changed the lower ball joint and that fixed the problem. I replaced the strut for smoother and firmer ride. I OEM strut was rocking the car at 96K miles. I didn't regret a bit. You can stick with OEM or KYB. My GR-2. I think sewell and OEM strut is a better deal then KYB Outlet or just suspension.com Think twice before buying anything from JustSuspension.com I said dot gone.
Thread
Thread Starter
Forum
Replies
Last Post
BinaryJay
GS - 3rd Gen (2006-2011)
30
11-04-15 08:53 AM
lserlohn
RX - 1st Gen (1999-2003)
8
08-23-11 07:00 PM
/Aerostar\
Suspension and Brakes
4
04-17-04 06:21 PM