AUX input for under $5.00*** You guys wont be disappointed Pic intensive
#151
Driver School Candidate
Join Date: Sep 2013
Location: Georgia
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Great walkthrough, pretty easy to repeat. Worked great when I tested it out, but now my right speakers stopped working when I put the glove box back together. I'll have to tear it apart again next weekend. Guessing a something came loose...
#153
Driver School Candidate
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Thanks to OP for providing the DIY and also thanks to another post for the FM solder method. I did the FM solder method, worked great but when I used a bluetooth unit, was getting a lot of hiss, yes due to grounding from cigarette lighter. Without wanting to break apart the cigarette lighter and fixing the grounding issue, I decided to use the interrupt method outlined in the FM solder post. What I didn't want to do was use the blank CD and wanted a ply and play and thought to wire it for bypass when plugged in and still have CD when unplugged from phone jack.
Parts: Same as this post, no additional needed.
In short:
1. I found the L and R + preamp out from the CD Changer (it was the Red and White in my car).
2. Cut both wires so you can insert the AUX jack (run wires as long as you need to to route the jack to where ever you want to) in between both L and R + for the interrupt.
3. Start with R+ from CD Changer, connect to Pin 4. Connect the same wire where you cut going to the stereo and amp and connect to pin 5.
4. Take L+ from CD Change, connect to pin 3. Connect same wire where you cut going to stereo to pin 2.
5. For the negative (-) lead, just connect those to the two L and R - (Note: You may be able to splice into the two leads but I accidentally cut mine and only connected to the wires going to the stereo and left the two ends from the CD Changer open (of course, cover those up). I didn't have time to try and understand why as it worked, and maybe I had the wrong wires.
Essentially, if nothing is plugged in, CD signal goes straight through as the circuit is closed in the AUX jack. Plug your favorite device to the AUX and it interrupts the CD signal and sends your signal. No CD sound and now you can have whatever CD you like and just run it as normal as both will work.
Credit goes to OPs from both these posts, I just got a bit creative.
FM Solder link:
https://www.clublexus.com/forums/gs-...-headunit.html
Parts: Same as this post, no additional needed.
In short:
1. I found the L and R + preamp out from the CD Changer (it was the Red and White in my car).
2. Cut both wires so you can insert the AUX jack (run wires as long as you need to to route the jack to where ever you want to) in between both L and R + for the interrupt.
3. Start with R+ from CD Changer, connect to Pin 4. Connect the same wire where you cut going to the stereo and amp and connect to pin 5.
4. Take L+ from CD Change, connect to pin 3. Connect same wire where you cut going to stereo to pin 2.
5. For the negative (-) lead, just connect those to the two L and R - (Note: You may be able to splice into the two leads but I accidentally cut mine and only connected to the wires going to the stereo and left the two ends from the CD Changer open (of course, cover those up). I didn't have time to try and understand why as it worked, and maybe I had the wrong wires.
Essentially, if nothing is plugged in, CD signal goes straight through as the circuit is closed in the AUX jack. Plug your favorite device to the AUX and it interrupts the CD signal and sends your signal. No CD sound and now you can have whatever CD you like and just run it as normal as both will work.
Credit goes to OPs from both these posts, I just got a bit creative.
FM Solder link:
https://www.clublexus.com/forums/gs-...-headunit.html
#154
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I had a question, I did everything as described. Just curious, what did you ground 1/8 jack too? I used one of the screws that mounts the disc changer. I don't think It worked for me. Just curious.... Please help
#155
Lead Lap
iTrader: (11)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
If you want to be able to switch between the CD player and your AUX input, there's a slightly more complicated way...and inserting and removing the 3.5 plug will switch between the CD changer and AUX input.
But, for the fastest way to get it working ... do the following
![Name: wiring_zpsaf13c7af.png
Views: 1423
Size: 7.4 KB](https://www.clublexus.com/forums/attachments/gs-2nd-gen-1998-2005/425704d1501316137-aux-input-for-under-5-00-you-guys-wont-be-disappointed-pic-intensive-wiring_zpsaf13c7af.png)
#158
Driver School Candidate
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Your wire should not be the problem. More than likely it is a wiring issue so double check your connections but this may be an incorrect wiring of the ground pin from jack to the negative wires. Did you splice into the negative connections or cut those. In my setup, i cut the neg leads instead of just splicing into it.
#159
Lead Lap
iTrader: (11)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Your wire should not be the problem. More than likely it is a wiring issue so double check your connections but this may be an incorrect wiring of the ground pin from jack to the negative wires. Did you splice into the negative connections or cut those. In my setup, i cut the neg leads instead of just splicing into it.
Hope the below illustration helps clear this up
![](http://robrobinette.com/images/Audio/TRS_Pinout_4_Wire.jpg)
![](http://i413.photobucket.com/albums/pp215/YUNTX/Linked%20photos/audiojack_zpsc7144921.png)
The above illustration is just to show how the audio jack works. Pin location isnt accurate
Last edited by runyun; 03-12-14 at 01:30 PM. Reason: added illustration
#160
Driver School Candidate
Join Date: Dec 2006
Location: tx
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have a 2000 gs 400 that I'd like to add an aux 3.5mm jack to connect to my Android phone to be able to play music thru the factory stereo. I'm all for simplicity, is there any sound quality advantage in using the relays in Puredrifter's thread than this method?
Thanks
Thanks
#161
Lead Lap
iTrader: (11)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have a 2000 gs 400 that I'd like to add an aux 3.5mm jack to connect to my Android phone to be able to play music thru the factory stereo. I'm all for simplicity, is there any sound quality advantage in using the relays in Puredrifter's thread than this method?
Thanks
Thanks
It allows you to switch between the Changer and AUX (without removing the 3.5mm plug.. I did that so I can install a bluetooth device)
$10 bucks at Fry's
#162
Driver School Candidate
Join Date: Dec 2006
Location: tx
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Thanks for the reply.
Do you by chance have a blog that you posted how you wired this relay and how you add the BT device? I'd like to do something similar in my 2000 gs400 w navi if possible and trying to see whats possible.
Appreciate your time.
Do you by chance have a blog that you posted how you wired this relay and how you add the BT device? I'd like to do something similar in my 2000 gs400 w navi if possible and trying to see whats possible.
Appreciate your time.
#163
Driver School Candidate
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
My two cents. 1- once I have access to 3.5mm jack to plug in y phone, there's really no reason for me to use the CD changer so unplugging isn't a problem 2- thus installing jack is simpler in my opinion.
Quality will be more dependent on quality of your cpressed music.
Quality will be more dependent on quality of your cpressed music.
#164
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
This helps, but when I grounded to the green and white wires, everything went super low, even the radio. The I plugged the aux in a heard it but it was low too.
#165
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Your wire should not be the problem. More than likely it is a wiring issue so double check your connections but this may be an incorrect wiring of the ground pin from jack to the negative wires. Did you splice into the negative connections or cut those. In my setup, i cut the neg leads instead of just splicing into it.