2GS Elevel owners please chime in!!!!
#18
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
without the touchpad its $1685
http://bagriders.com/modlab/products...ER-SWITCH.html
with the touchpad its $1985
http://bagriders.com/modlab/products...TOUCH-PAD.html
http://bagriders.com/modlab/products...ER-SWITCH.html
with the touchpad its $1985
http://bagriders.com/modlab/products...TOUCH-PAD.html
#19
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
after hours of sitting down and trying new position of the sensor i finally came up with this..
here are the fronts, the sensor is mounted to the chasis and the lower pivot ball screwed into the welded bracked on the front sway bars. Keep in mind none of the sensor rods are shortend
Attached Images
Rears
welded brackets for the sensor and extended the ball joint pivot on the traction bar welded as well
also the sensor was reverse mounted !!
Attached Images
here are the fronts, the sensor is mounted to the chasis and the lower pivot ball screwed into the welded bracked on the front sway bars. Keep in mind none of the sensor rods are shortend
Attached Images
![](https://www.clublexus.com/forums/attachments/gs-second-generation/247166d1337447902-air-runner-accuair-installed-pics-imag0253.jpg)
Rears
welded brackets for the sensor and extended the ball joint pivot on the traction bar welded as well
also the sensor was reverse mounted !!
Attached Images
![](https://www.clublexus.com/forums/attachments/gs-second-generation/247162d1337447131-air-runner-accuair-installed-pics-imag0237.jpg)
#22
Rookie
iTrader: (3)
Join Date: Aug 2012
Location: Hawaii
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Bumping this from the dead. Does anyone have the new sensors with multiple mounts? Also measurements would be great and maybe more pics if anyone else has a different way of setting it up. Ive been driving my car for a while without the sensors and would love to make use of them when I have the time to tackle this lol.
#26
Lexus Test Driver
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
The front's that "Stealth" posted is perfect if you don't have the headlight leveling. I used this pic as a reference. I have 1.5" of travel.
Here's a shot of my rear where I mounted, with 2" of travel. Dont mind the dirty wheel well, it's all cleaned up with fresh undercoat. hahaha...
ill try and get better pics today.
Here's a shot of my rear where I mounted, with 2" of travel. Dont mind the dirty wheel well, it's all cleaned up with fresh undercoat. hahaha...
ill try and get better pics today.
![](http://i11.photobucket.com/albums/a156/Type_RICEBURNER/2013-04-10192321_zps09582da0.jpg)
#27
Lexus Test Driver
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I've asked Tom and some others on small advices..but really though, sometimes a few minutes is all you need with the search button. I've used Lee's thread also as a basis for my elevel along with Carbongs pics.
https://www.clublexus.com/forums/sus...ed-pics-5.html
https://www.clublexus.com/forums/sus...ed-pics-5.html
Thread
Thread Starter
Forum
Replies
Last Post
gsjason300
GS - 2nd Gen (1998-2005)
36
11-24-12 09:35 PM
maniax
ES - 1st to 4th Gen (1990-2006)
6
06-16-06 12:01 PM