step2me

dont seem like a big deal but it works just bend it over a bit

usa5655

iTrader: (1)

wow that is bright!! i think im gonna do it soon lol

giolex300

I had the same problem..the wire got loose and had too much play..i cut a SMALL piece of tape and shoved it in there.....works like a charm ever since

Jamsheddy

iTrader: (4)

Nice man. Always glad to see others get ideas and help from a simple question. Everyone on here seems so helpful and cool. I am new here and I fell welcomed.
I know what you are saying but the bulbs I got were 3-SMD from here and there are no wires.
http://www.v-leds.com/6K-WHITE-3-LED...98403-1-2.html
Only one side of the floor board light is lit up. I was thinking of taking a wire brush and maybe cleaning the socket up. Hope that helps.
Well I will try and clean out the socket and see if it helps. My bulbs don't have wires. :-(
http://www.v-leds.com/6K-WHITE-3-LED...98403-1-2.html
It helps when females can see when they reach for their purse or if you drop something lol.
Well I have no play at all. It's just I think there's a bad contact. Maybe thinking about scrubbing it a bit with a wire brush. Hope that takes care of the problem.
Thanks everyone for your support and advise. I will try the brush tonight and update you guys.

Jamsheddy

iTrader: (4)

Thanks for the pic too!

oztiks

So, what's the consensus on this? I happened across this thread by accident, but am actually in the process of trying to decide on what bulbs to order...

I was leaning towards

http://store.ijdmtoy.com/ProductDeta...KU206&CartID=1

But wonder if there will be fitment issues?

Thanks!

Jamsheddy

iTrader: (4)

Those would work to as long as the bulbs are #74 they will fit. The post above that I replied about has a link from v-leds.com and they are legit.

Actually I forgot to update this thread. I actually cleaned out the connectors with a bit of alcohol and a q-tip. Actually worked. Both bulbs light up now and are the perfect brightness.

oztiks

Got a set. Perfect fit for footwell, not as wide of a light spread as I'd like, but decent.

HrdPrkDGS4

speaking of floor board lights, has anyone done a rear floor board light?