GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

HELP! Car starts and dies right after!

Thread Tools
 
Search this Thread
 
Old 02-14-13, 07:27 PM
  #1  
AM21GS400
Driver
Thread Starter
iTrader: (2)
 
AM21GS400's Avatar
 
Join Date: Feb 2012
Location: WI
Posts: 153
Likes: 0
Received 1 Like on 1 Post
Default HELP! Car starts and dies right after!

I have an 00' gs400. It runs perfect for 6 out of 7 days of the week. But during the one "bad day" the car will start up just fine, sit at idle for about a second or two, then the revs go down to 0rpm, and the car dies.

When you attempt to start it after that, the starter goes for about 10 seconds until the car turns over again, sometimes the car will run fine after that, and sometimes it will die again, and again.

Anybody know what the HECK could be going on here. It just seems so weird to me!

Any insight would be greatly appreciated!

- Anthony.
Old 02-15-13, 03:33 PM
  #2  
SC400slide
In Recovery Mode

iTrader: (11)
 
SC400slide's Avatar
 
Join Date: Apr 2012
Location: NM
Posts: 3,871
Received 35 Likes on 29 Posts
Default

Could be MAF, but before you do anything like replacing a car part, do you have a CEL? If you do indeed have a CEL pull the code...could also be, from the top of my head: bad fuel, dirty injectors, loose battery terminals, fuel pump going out...??? CEL?
Old 02-16-13, 12:43 PM
  #3  
AM21GS400
Driver
Thread Starter
iTrader: (2)
 
AM21GS400's Avatar
 
Join Date: Feb 2012
Location: WI
Posts: 153
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by SC400slide
Could be MAF, but before you do anything like replacing a car part, do you have a CEL? If you do indeed have a CEL pull the code...could also be, from the top of my head: bad fuel, dirty injectors, loose battery terminals, fuel pump going out...??? CEL?

There is no CEL
Old 02-16-13, 12:54 PM
  #4  
SC400slide
In Recovery Mode

iTrader: (11)
 
SC400slide's Avatar
 
Join Date: Apr 2012
Location: NM
Posts: 3,871
Received 35 Likes on 29 Posts
Default

Then I'd check the things I listed above. GL.
Old 02-17-13, 09:52 AM
  #5  
AM21GS400
Driver
Thread Starter
iTrader: (2)
 
AM21GS400's Avatar
 
Join Date: Feb 2012
Location: WI
Posts: 153
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by SC400slide
Then I'd check the things I listed above. GL.
alright man thanks a lot.
Old 02-17-13, 10:48 AM
  #6  
kamlung
Instructor
iTrader: (8)
 
kamlung's Avatar
 
Join Date: Feb 2009
Location: NJ
Posts: 1,133
Received 38 Likes on 31 Posts
Default

check maf and icv
Old 05-30-13, 08:45 PM
  #7  
AM21GS400
Driver
Thread Starter
iTrader: (2)
 
AM21GS400's Avatar
 
Join Date: Feb 2012
Location: WI
Posts: 153
Likes: 0
Received 1 Like on 1 Post
Default

sorry to bring back this old thread but I thought I'd let everybody know how I fixed the issue, just incase anyone else comes across a similar problem.

First I changed the spark plugs, to NGK iridiums. That helped a little, but didn't completely fix the issue, what I did next, was because I had an apexi neo for my intake and exhaust, I went onto the air map settings, and I increased the fuel, at around 800 rpms, and this completely got rid of the problem, the car starts and runs great now, and I havn't had an issue since I did this, hopefully this helps.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
D-Boi
GS - 2nd Gen (1998-2005)
4
04-07-24 07:28 PM
YukisMan
LS - 1st and 2nd Gen (1990-2000)
3
02-16-18 09:01 PM
pubbin
IS - 1st Gen (2001-2005)
18
12-05-15 09:37 AM
Sewpra
LS - 1st and 2nd Gen (1990-2000)
2
05-29-14 07:29 PM
Xutech
Performance & Maintenance
10
01-24-05 06:39 PM



Quick Reply: HELP! Car starts and dies right after!



All times are GMT -7. The time now is 05:13 AM.