When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
worked on the HVAC box some more almost ready to completely pull it, removed the dash support, sanded the surface rust off of it and rattle canned it to match my brakes and suspension
worked on the HVAC box some more almost ready to completely pull it, removed the dash support, sanded the surface rust off of it and rattle canned it to match my breaks and suspension
Now that’s GS love when you care enough to paint a part that will never be seen. Respect.
Now that’s GS love when you care enough to paint a part that will never be seen. Respect.
HE knows it is painted. That is all that matters.
I have been swapping out 74 LED bulbs for brighter, better covering ones. These are great. Cheap, run on 12v (or the resistor is stupid small), easy to remove from housing, and fit perfectly in some of the neo wedge sizes. https://www.ebay.com/itm/50-x-Mix-co...-/222764143553
You can easily remove the incandescent bulb from the neo wedge and these and then reinsert the LED into the wedge. The bulbs for the Trac and mode buttons are a bit tight. They may need some shaving.
Nice job sakataj on the metal bar. I always like when people paint that bar in their vehicle. I need to do that to my Supra when I remove the interior next time.
Nice job sakataj on the metal bar. I always like when people paint that bar in their vehicle. I need to do that to my Supra when I remove the interior next time.
when i finish pulling the HVAC box i will paint the side arms that go around the side HVAC box where the radio screws into also just to finish it off and since i have a can left.
06-26-18, 03:04 PM
