What did you do to your GS today?
06-11-19, 02:13 PM
#2701
Driver School Candidate
That's the problem I have. Oh yeah, I'll be doing this mod over the weekend at the latest. Maybe I can get a few hours to myself for Fathers day so I can do this and install my sway bar links.
06-12-19, 07:52 AM
#2702
Driver School Candidate
Spent about 3 hours using my 3M headlight kit (rubbing compound and buffer) to buff off every little piece of road grime and tar that never comes off in the car wash. Also got in my color rite pens in the mail and touched up the rock dings on the front, the pearl is custom so the pen isn’t exact but you can’t tell unless you get really close and it looks like new compared to little dark chips. It will hold me over till I get the car resprayed. I wanna add that the color rite 2 pen kit is pretty awesome but I don’t see it working a second time due to how thick the base coat and color coat were, I feel like when I go to use it again it will just be a hard dry paint tip that won’t pump.
06-12-19, 07:55 AM
#2703
Driver School Candidate
06-12-19, 08:22 AM
#2704
Driver School Candidate
Just got the car 2 weeks go, but PO had left the oil change for me to do.
Completed oil change with Valvoline Maxlife and new filter. Dropped 2qts from trans and refilled with Maxlife ATF...definitely runs smoother and while the trans fluid wasn't burnt or too discolored it was on the high end of mileage as it wad dark red. Shifts smoother and lighter.
I had checked the surround on the Pioneer sub and it looked good, impedance checked out on Multi-meter as well. I installed an old school Lanzar Opti Plus 50 amp I had in storage. Its 125RMSx1@2ohms. A little overhead, but it sounds great and it will hold me over until I decide what direction I want to go in.
Oh and took my Yukon to the gas station since I have only driven it twice since I got the GS3 and it was nearly empty. Definitely enjoying my better MPG on the GS.
Completed oil change with Valvoline Maxlife and new filter. Dropped 2qts from trans and refilled with Maxlife ATF...definitely runs smoother and while the trans fluid wasn't burnt or too discolored it was on the high end of mileage as it wad dark red. Shifts smoother and lighter.
I had checked the surround on the Pioneer sub and it looked good, impedance checked out on Multi-meter as well. I installed an old school Lanzar Opti Plus 50 amp I had in storage. Its 125RMSx1@2ohms. A little overhead, but it sounds great and it will hold me over until I decide what direction I want to go in.
Oh and took my Yukon to the gas station since I have only driven it twice since I got the GS3 and it was nearly empty. Definitely enjoying my better MPG on the GS.
The following 5 users liked this post by ph0bolus:
afgcfan (07-10-19),
Ellis4 (07-11-19),
firelizard (07-12-19),
Sauceboss (03-22-20),
SynDragon (07-15-19)
07-11-19, 09:55 PM
#2707
Driver School Candidate
Also started stripping / emptying out this sexy beast. In the end it will leave to the junk yard just a shell. Good majority will go into my ride and the rest will be sold / parted.
07-12-19, 03:17 PM
#2708
Driver School Candidate
Join Date: Jul 2019
Location: Ca
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Need help with gs
I used to like looking at this thread on another forum I belonged to so decided to start one here. Post what you have done along with pics if you have them.
Today I changed my bank 2 sensor 2 O2 sensor which was really easy access compared to the other sensors I have done.
Today I changed my bank 2 sensor 2 O2 sensor which was really easy access compared to the other sensors I have done.
My car won’t start! Battery, alternator, starter are all good! Car hesitated when I pressed the gas and then died, it would start then die after a few seconds now it won’t even crank no tic tic tic nothing
07-12-19, 03:25 PM
#2709
Driver School Candidate
Join Date: Jul 2019
Location: Ca
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car won’t start
Can anyone explain or know of anyone having the same problems as me, my car hesitated when I pressed the gas, stalled, I stopped it would start for a few seconds and then turn off again, then it won’t even start anymore. There’s no clicking or Ticing the battery, alternator, and starter are all good.
07-12-19, 10:13 PM
#2710
Advanced
Can anyone explain or know of anyone having the same problems as me, my car hesitated when I pressed the gas, stalled, I stopped it would start for a few seconds and then turn off again, then it won’t even start anymore. There’s no clicking or Ticing the battery, alternator, and starter are all good.
Check the fuel pump
09-20-19, 11:34 PM
#2712
The following 2 users liked this post by shwalker07:
DundukovEM (09-27-19),
TrueGS300 (09-21-19)
09-21-19, 05:34 AM
#2713
Nice. It’s the little things that make all the difference. Where/how’d you find it?
09-21-19, 09:41 AM
#2715
I would almost think this holder piece could be 3d printed with a added gear/spring mechanism.