Running 3mm hubcentric spacers to clear TT brakes in front and they make my steering wheel shake.... I hate them! (where can i get 1mm!)

Went back to discount tire 4 times for rebalance the guy final showed me the gap between the center of the wheel and the rotor hub they are supposed to ride on.... I dont know how you guys get away with 15mm and up, your whole car must shake!

 

you might be doing something wrong or the spacers might be defective? i known people who are and have ran 15mm with no problems.

 

Are your spacers hub centric?

 

Re-read the post again, forgive my ignorance haha.

 

yours are just generic

 

Your spacers are hubcentric to Lexus but your wheels are not. Thus you need hub centric rings to make your wheels match the spacers. I could be wrong tho

 

Im using lexus wheels!

and LOL... who changed my thread title to this? interesting choice mods....lol

 

OP needs hubecentric spacers.

 

I actually had the same problem with hubcentric spacer 5 and 10mm ichiba with the extended bolts and I had hubcentric rings for my aftermarket wheels. I had discount tire remove them the next day after getting them installed and no more shaking. I'm sure it's most likely an alignment issue camber/toe etc... since the wheels are balanced. Something to consider for the OP...

 

You have a picture of your spacer? That would help narrow things down alil

 

Generic pic, but thats what they look like.....

 

- spacers


- hub centric spacers


- hub centric rings


- wheel adapters


- a giraffe



are all different things.

 

I've ran 10MM, 15MM, and even 25MM spacers and had no problems. All were hub centric and I used hub rings.

 

awesome!!!

 

Hahaha. Funny shizzle. Good stuff man.