Changed my AC and Radio display color
#106
Pole Position
iTrader: (3)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
This is an old thread but Very Nice- Rock, I hope you are still doing this?
I like to change out my dome light (Blue), 2 front foot well lights (Blue), and my Ignition ring to RED. Can you tell me what I need and if possible I like to buy it from you..
Regards,
Don
I like to change out my dome light (Blue), 2 front foot well lights (Blue), and my Ignition ring to RED. Can you tell me what I need and if possible I like to buy it from you..
Regards,
Don
#107
Pole Position
Join Date: Sep 2003
Location: ThA Bx!!!
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
i kinda just ran into a problem with two of my buttons on the nav went out......i remember with my LS i changed the leds with a set from Radio shack.....does anyone if i could do this with the gs?????
#108
Lexus Champion
Thread Starter
iTrader: (8)
Join Date: May 2001
Location: So Cal
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
![Unhappy](https://www.clublexus.com/forums/images/icons/icon9.gif)
I honestly do not remember.. It was a while ago when I did that, but I got the cell phone LED's from Hong Kong(ebay) and the tools, I have. They come in small strips and you have to cut them to solder them on to the radio circuit board. I used 2 because in some locations, it would have been dimmer on the radio. I hope this helps.
Rock
Rock
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
#109
Lexus Champion
Thread Starter
iTrader: (8)
Join Date: May 2001
Location: So Cal
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Originally Posted by DuttyLeXus
i kinda just ran into a problem with two of my buttons on the nav went out......i remember with my LS i changed the leds with a set from Radio shack.....does anyone if i could do this with the gs?????
Rock
#110
Driver School Candidate
Join Date: Apr 2007
Location: NC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Ahh you're gunna beat me to it!
I was planning on changing the door LED's to white ones. The cover on my LS's doro switches is black and the green light barely shines through.
Also, did anyone know that the key holes on the doors are illuminated too?
They are too dim to see though.
I was planning on changing the door LED's to white ones. The cover on my LS's doro switches is black and the green light barely shines through.
Also, did anyone know that the key holes on the doors are illuminated too?
They are too dim to see though.
#111
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Any DIY on disassembling the console? I also need ot replace the light on one of the seat heater switches.
JimA
#112
Pole Position
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
the 98-05 GS don't have it.
i have a 93 LS400 and it does it.
Sometimes i wonder why Lexus doesn't put some modifications which they had on older models on the new ones. this for example, u would think their 98 car would at least have a illluminated key which their 93 did.
#113
Pole Position
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
the 98-05 GS don't have it.
i have a 93 LS400 and it does it.
Sometimes i wonder why Lexus doesn't put some modifications which they had on older models on the new ones. this for example, u would think their 98 car would at least have a illluminated key which their 93 did.
#115
Driver School Candidate
Join Date: Jul 2008
Location: AR
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
![Question](https://www.clublexus.com/forums/images/icons/icon5.gif)
Hello!! New to this site... i know this is an extremely old post but can anyone point me in the right direction on how to start this mod??? i have a couple of led's out on my radio and a/c and this would be the best time for me to change the color.... any help would be greatly appreciated!! Thanks!!!!
#116
Lexus Champion
Thread Starter
iTrader: (8)
Join Date: May 2001
Location: So Cal
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
![Cool](https://www.clublexus.com/forums/images/icons/icon6.gif)
Well, as I had previously stated, the LED's were the cell phone types I got from ebay, but you could also get them at your local Fry's. They will come in a strip and you then have to cut and solder them. Also, you will need to put in resistors because of the voltage diference. I don't recommend this unless you are really just want to do it as a hobbby, or are pretty savy with electronics. Just keep in mind that it's very time consuming and there is a possibility you will fry your circuit board if you are not careful. As you see from my pics, the radio has to be completely dissasembled and the existing bulbs and covers removed from the circuit boards. But it can be done as I did and the pics show you. I hope this helps and good luck young Simba! I would always recommend just replacing the unit. It will be faster and easier.
Rock
Rock
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
#118
Driver School Candidate
Join Date: Dec 2006
Location: Taiwan
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
#119
Lexus Test Driver
iTrader: (7)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Alright Jxd or Rockero28--I have taken apart my stereo & HVAC, and searched for info, and taken apart the stereo again. I'm ready to tackle this mod (swap incandescent for white LEDs).
I just need help with materials! Here in Wisconsin, Radio Shack folks look at me like I'm a crack smoker... I need to know the specs on the LED and the resistor used. A source for these parts would be great, but I'll take what I can get.![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
The best I've come up with so far is a T1 LED with like a 380 or 500 ohm resistor (I forgot exactly, I'd have to search for that post).
I just need help with materials! Here in Wisconsin, Radio Shack folks look at me like I'm a crack smoker... I need to know the specs on the LED and the resistor used. A source for these parts would be great, but I'll take what I can get.
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
The best I've come up with so far is a T1 LED with like a 380 or 500 ohm resistor (I forgot exactly, I'd have to search for that post).