GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

Removing Steering Wheel....

Thread Tools
 
Search this Thread
 
Old 03-08-14 | 03:59 PM
  #1  
RCFC89's Avatar
RCFC89
Thread Starter
Pole Position
iTrader: (1)
 
Joined: Mar 2013
Posts: 204
Likes: 1
From: WA
Default Removing Steering Wheel....

I've read several Threads on removing the steering wheel and they all say remove the Tabs on both sides of the steering wheel to get access to the torque screws to remove the airbag. My problem is I have the volume etc. controls on the left side and it isn't coming off. I don't won't to break it. There is a little hole the back of it but there is nothing inside to push to release the controls from the wheel. Has anyone removed this before?
Attached Thumbnails Removing Steering Wheel....-volume.jpg  
Old 03-08-14 | 04:46 PM
  #2  
RCFC89's Avatar
RCFC89
Thread Starter
Pole Position
iTrader: (1)
 
Joined: Mar 2013
Posts: 204
Likes: 1
From: WA
Default

Finally got it off. Not entirely sure why the pin hole is there. It doesn't really serve a purpose. There is basically a clip in the front and the back that holds the plastic cover on. If you take a flat head screw driver on both sides and wedge the cover pops right off. The actual volume control module still in place and held in by 2 screws. By removing the outer cover as explained you now have access to the other torque screw.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hiep25
ES - 5th Gen (2007-2012)
1
06-03-18 02:18 PM
shaft1
LS - 1st and 2nd Gen (1990-2000)
3
09-07-12 01:52 PM
badx33
IS - 2nd Gen (2006-2013)
10
11-11-09 10:04 AM
snook
SC- 1st Gen (1992-2000)
3
10-10-09 05:48 AM
BlackRX300
RX - 1st Gen (1999-2003)
8
04-05-09 01:22 PM




All times are GMT -7. The time now is 09:11 AM.