GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

New problems

Thread Tools
 
Search this Thread
 
Old 06-08-15 | 09:43 PM
  #1  
Pos300's Avatar
Pos300
Thread Starter
Driver School Candidate
 
Joined: Jun 2015
Posts: 4
Likes: 0
From: Virginia
Default New problems


Ok if you read my last thread my car is still losing coolant but now new problems have surfaced my key which is an ilco copy master will not turn in the driver side door it works everywhere else and also my driver side door will not lock when I lock any other door plz help at my wits end here
Old 06-08-15 | 11:25 PM
  #2  
Lutkis's Avatar
Lutkis
Lead Lap
 
Joined: May 2013
Posts: 517
Likes: 4
From: Finland
Default

Seems like the driver side door has broken door lock actuator.
Maybe the passenger side too.
Old 06-08-15 | 11:48 PM
  #3  
shwalker07's Avatar
shwalker07
Lead Lap
 
Joined: May 2015
Posts: 449
Likes: 48
From: Illinois
Default

Have you tried some dry lube for the keyhole? I also believe your door lock actuator is bad if your door does not lock or unlock with the lock/unlock button inside your GS.
Old 06-09-15 | 01:36 PM
  #4  
01gs3's Avatar
01gs3
Pole Position
iTrader: (10)
 
Joined: Jan 2006
Posts: 305
Likes: 2
From: tx
Default

I agree with trying lube for the key hole. Use wd40, pb blaster or whatever. Spray on your key and in the hole. Insert key and try turning your key both directions. Hopefully it'll loosen up.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jborelli
LS - 3rd Gen (2001-2006)
0
01-23-18 02:20 PM
Jayss01
RX - 1st Gen (1999-2003)
7
06-10-17 11:49 PM
English66
GS - 2nd Gen (1998-2005)
5
09-28-09 03:17 PM
S54toIS350
IS - 2nd Gen (2006-2013)
8
05-27-07 11:59 AM



Quick Reply: New problems



All times are GMT -7. The time now is 10:02 AM.