OMG!! They are here!! (Zauber wheels)
#62
i just want 2 say that it looks amazing, the rear gap was already mentioned so i guess u will take care of that when u can, r u going 2 keep the gold emblems package on the car, just my opinion , its looks nicer with the chrome emblems package . so whats next? bodykit? engine upgrades?
#63
Lexus Champion
Z,
Very sweet ride you have shaping up.. Just one more thing I noticed was the rear lug nuts look like they stick out too far.. I agree with bluelex the gold lettering should come off and get chrome ones or the platnium (Black Chrome) ones.. Keep up the good work!
Very sweet ride you have shaping up.. Just one more thing I noticed was the rear lug nuts look like they stick out too far.. I agree with bluelex the gold lettering should come off and get chrome ones or the platnium (Black Chrome) ones.. Keep up the good work!
#64
Originally posted by 2SAVVY
Z,
Very sweet ride you have shaping up.. Just one more thing I noticed was the rear lug nuts look like they stick out too far.. I agree with bluelex the gold lettering should come off and get chrome ones or the platnium (Black Chrome) ones.. Keep up the good work!
Z,
Very sweet ride you have shaping up.. Just one more thing I noticed was the rear lug nuts look like they stick out too far.. I agree with bluelex the gold lettering should come off and get chrome ones or the platnium (Black Chrome) ones.. Keep up the good work!
#68
Pole Position
Thread Starter
thanks again guys, yeah I will have to readjust the rears and get it lower. I think I might take the front down just a tad. I know the gold lettering is tacky - one of the few things I will get around too eventually. I was looking into getting a black emblem kit but for a pre-2k1, the set will cost $180. not sure if I want to jump on that just yet. I may just go for the chrome ones.
you know I didn't realize the rear lugs until you mentioned it. Bluelex, yours doesn't stick out? I am sure GS4Will gave you similar lugs or unless you used your factory ones. I used the set that came with the gorilla locks.
I forgot to mention too that after I had my alignment done, my VSC/ABS/VSC off lights came on. I think they accidnetally hit the sensors of something because they were having a hard time with my rear alignment. It took them an hour just to get the rears done because the adjustment slot for the one of the rear toes was pinched for some reason. So now I am not sure what to do. I surely do not want to spend any more money taking it to the dealership when I have no warranty on this car. I found some threads on it and it has me worried now that I have to shell out unnecessary cash.
The next mods I am looking into is definitely replacing the emblems. After that I was thinking of getting a roof spoiler or maybe a greddy front lip if I can get my hands on one or L-tuned sides. But for the moment I am all tapped out Hopefully I will be able to find some good deals.
you know I didn't realize the rear lugs until you mentioned it. Bluelex, yours doesn't stick out? I am sure GS4Will gave you similar lugs or unless you used your factory ones. I used the set that came with the gorilla locks.
I forgot to mention too that after I had my alignment done, my VSC/ABS/VSC off lights came on. I think they accidnetally hit the sensors of something because they were having a hard time with my rear alignment. It took them an hour just to get the rears done because the adjustment slot for the one of the rear toes was pinched for some reason. So now I am not sure what to do. I surely do not want to spend any more money taking it to the dealership when I have no warranty on this car. I found some threads on it and it has me worried now that I have to shell out unnecessary cash.
The next mods I am looking into is definitely replacing the emblems. After that I was thinking of getting a roof spoiler or maybe a greddy front lip if I can get my hands on one or L-tuned sides. But for the moment I am all tapped out Hopefully I will be able to find some good deals.
#69
i looked at my rears and the lugs don't stick out like that. and i got the same gorrila lugs, let me find a pic of closeups so u can c....
the VSC/ABS/VSC light comes on 4 me too, i think its normal since we tinkered with the suspension, might have 2 go 2 dealer 2 get the sensor adjusted, but i haven't yet ,it turns off when i turn off the car...it usually only comes on when i turn the wheels all the way 2 one side, other than that it doesn't come on 4 me too often.
ok found the rear lugs shot
the VSC/ABS/VSC light comes on 4 me too, i think its normal since we tinkered with the suspension, might have 2 go 2 dealer 2 get the sensor adjusted, but i haven't yet ,it turns off when i turn off the car...it usually only comes on when i turn the wheels all the way 2 one side, other than that it doesn't come on 4 me too often.
ok found the rear lugs shot
Last edited by bluelex; 07-20-03 at 06:45 PM.
#70
Congrats Danny! You finally did it. I hope everything went well with the shop and I hope you're satisfied witht the installation. I'll catch your ride at the next meet.
#71
Pole Position
Thread Starter
Bluelex, yours don't stick out....that's weird that mines does. I have to see what's the deal with the lugs. I wonder if there are differences between the front and the rear lugs? Also, your VSC lights come on too?? My are on and have stayed on since every time I drive. I am hoping that it will turn off eventually and that it doesn't affect the driveability of the vehicle. Thanks for letting me know.
Yeah dude, Sin(sp?)/Autohaus was very professional. He took his time installing the teins and I was very happy with it. Thanks again for hooking me up!
EDIT:
now that I have a chance to drive it around for a bit, something I wanna say about the ride quality. man I am so glad I went with the teins cs. the ride is absolutely amazing combined with the falken azenis, the ride is super quiet and suspension is really smooth. I currently have the factory settings on my teins but will mess with it when I get the correct ride height for the vehicle.
I think I should of gotten the ride height squared away first before I had the alignment done, I may have to go back to adjust the camber again
Originally posted by cong28
Congrats Danny! You finally did it. I hope everything went well with the shop and I hope you're satisfied witht the installation. I'll catch your ride at the next meet.
Congrats Danny! You finally did it. I hope everything went well with the shop and I hope you're satisfied witht the installation. I'll catch your ride at the next meet.
EDIT:
now that I have a chance to drive it around for a bit, something I wanna say about the ride quality. man I am so glad I went with the teins cs. the ride is absolutely amazing combined with the falken azenis, the ride is super quiet and suspension is really smooth. I currently have the factory settings on my teins but will mess with it when I get the correct ride height for the vehicle.
I think I should of gotten the ride height squared away first before I had the alignment done, I may have to go back to adjust the camber again
Last edited by zmatrix; 07-20-03 at 09:16 PM.
#74
Originally posted by zmatrix
Bluelex, yours don't stick out....that's weird that mines does. I have to see what's the deal with the lugs. I wonder if there are differences between the front and the rear lugs? Also, your VSC lights come on too?? My are on and have stayed on since every time I drive. I am hoping that it will turn off eventually and that it doesn't affect the driveability of the vehicle. Thanks for letting me know.
Bluelex, yours don't stick out....that's weird that mines does. I have to see what's the deal with the lugs. I wonder if there are differences between the front and the rear lugs? Also, your VSC lights come on too?? My are on and have stayed on since every time I drive. I am hoping that it will turn off eventually and that it doesn't affect the driveability of the vehicle. Thanks for letting me know.