Newly Lowered GS300AWD
#1
Rookie
Thread Starter
Join Date: Oct 2006
Location: AL
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Newly Lowered GS300AWD
Well, I finally got the new springs on and wanted to post a couple pictures to show the results. Next up are some new wheels. Can't Wait!!! ;-)
Trending Topics
#9
Rookie
Thread Starter
Join Date: Oct 2006
Location: AL
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
#11
Driver School Candidate
Join Date: Oct 2006
Location: WA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
How did you do that I just talked to Tanabe and they said that kit would not work on the AWD car? I just got some 20" Kranze Bazerias and I need to close the fender gap!
#12
Rookie
Thread Starter
Join Date: Oct 2006
Location: AL
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
I called the local Tanabe dealer and they told me the same thing. But I took a page from my fellows here on CL and did it anyways with the NF210 and they work just fine on our cars (AWD). I would have held out for coilovers but the wheel gap was killing me and I figured this was a low cost interm solution until coil overs come out for the AWD. I say use the NF210s if you want to get rid of the gap and when the coil overs come out we get a group buy together to get them cheaper ;-)
#13
I called the local Tanabe dealer and they told me the same thing. But I took a page from my fellows here on CL and did it anyways with the NF210 and they work just fine on our cars (AWD). I would have held out for coilovers but the wheel gap was killing me and I figured this was a low cost interm solution until coil overs come out for the AWD. I say use the NF210s if you want to get rid of the gap and when the coil overs come out we get a group buy together to get them cheaper ;-)
#14
Driver School Candidate
Join Date: Dec 2006
Location: PA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone out there know if the Tanabe NF210 will work on a 2007 GS350 AWD? I spoke with Tanabe yesterday and they could not confirm and recommended I turn to the forum. Their website for 06 recommends NF112 for the GS430 & GS300. Planoag, does your GS300 sag lower in the back or is it pretty even? I can't really tell much by the photos.
Thanks
Thanks
#15
Does anyone out there know if the Tanabe NF210 will work on a 2007 GS350 AWD? I spoke with Tanabe yesterday and they could not confirm and recommended I turn to the forum. Their website for 06 recommends NF112 for the GS430 & GS300. Planoag, does your GS300 sag lower in the back or is it pretty even? I can't really tell much by the photos.
Thanks
Thanks