kaotiq

if it's 3M double sided tape or even body tape, then it will withstand car washes and rain. That stuff is used on the undersides of some body kits.

starstreak

Is that plasic flat? It looks so in the picture, yet when stuck on it seems to flow around the bumps of the lamp. where was this purchased again?

conclevage

iTrader: (1)

Plastic is not flat...there are indentations to make it flow around the bumps of the lamp and be applied smoothly. You can purchase them through l-tuned.

LexFather

That did work out better than I thought.
I can't understand Lexus sometimes. I would think the LS have chrome trim around the headlights. The Audi A6 does have it as well. The GS has a lot of chrome, headlights, window trim, lower side trim.

hsk73

Yes, the hood line blends in nicely now... but nice chrome trim around the headlight is gone...
I guess you gain some and loose some in this case.

milky

iTrader: (9)

i think it flows really nice.

nice job

HKN

Nice Mark...i Never Got My Set From Dave...maybe Now That I'm In Socal I Can Call Him Up And See If I Can Go Get A Set If He Still Have Them, Hahaha...

Your Car Is Coming Out Looking Real Clean...i Havent Added To My List Of Mods In A Loooooog Time, Probably Cus I Never Drive My Baby Hahahaha...she's Sitting Pretty In The Garage =p

Nice Write Up Like Always...

lossimo

Hey thanks for the detailed pics,my wife got a look at them and she's on board with it as the next mod!!

ChronoJ1

iTrader: (2)

Looks very nice. I like it.
Makes front end look more aggressive.

bippu

It really brings out a totally new personality to the front.
Good write up

carlos

iTrader: (1)

it doesnt blend evenly with the hood line IMO. if it was a little lower it would be perfect.

Jace7

looks vey nice, I agree. nice write-up and good install.

but I also agree that "for me" it needs to come down about 1/2 more inches to flow better where it touches the hood in the center. Needs to follow the line of the hood not go up 1/2 like it does.

But still looks very nice.

conclevage

iTrader: (1)

I agree...however, I think the eye lid would obstruct the light beam of the lows which is why they had to raise it.

Jace7

actually, probably doesn't matter now, since it's all done and nothing you can really do, but if you just got the part that goes over the chrome type plastic by the center, and had that part thickened out, it wouldn't adjust the part over or around the lights at all and would still then match up with the hood with the exact line.instead of the part being 1.5 inches by the center, it could be 2.0 inches or whatever the specs are without adjusting anything else, just that specific area.

Oh well. Still looks nice.

HKN

hey bro...dave finally contacted me saying tht my set is in and that he is going to get them painted soon...hopefully mine will end up looking as nice as urs man =P

still not a fan of double sided tape but what the hell...no complaints yet right...i'll take some pics whenever i get mine install...