Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Lexus IS Lighting Guides
- Lexus: How to install HID Headlights (on your non-HID equipped 2IS)
Step by step instructions for do-it-yourself repairs
Browse all: Lexus IS Lighting Guides
DIY - GS fog light replacement
#1
Driver
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
After searching for a good DIY on how to replace the GS's fog lights with a different bulb and not finding one, Mitchell (midnightgs) and I decided to make one with his car. There are many different ways to attempt this, but this seemed easiest to us.
Mods, if this is in the wrong section, feel free to move.
Tools required: 9006/HB4 bulbs (not pictured), Flat head, 10mm, and a good pair of hands
![Name: DSC00985.jpg
Views: 7295
Size: 18.5 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440778d1501409887-diy-gs-fog-light-replacement-dsc00985.jpg)
1) Turn on your car and turn you wheels toward the opposite direction of the side you want to start on.
2) Turn the following two clips 45 degrees clockwise and with you nails, gently pry the clips out. They do require excessive force but be careful not to break the clips
![Name: DSC00978.jpg
Views: 7207
Size: 26.7 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440779d1501409887-diy-gs-fog-light-replacement-dsc00978.jpg)
![Name: DSC00979.jpg
Views: 7195
Size: 15.8 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440780d1501409887-diy-gs-fog-light-replacement-dsc00979.jpg)
![Name: DSC00980.jpg
Views: 7160
Size: 16.0 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440781d1501409887-diy-gs-fog-light-replacement-dsc00980.jpg)
The clips removed should look like this.
Mods, if this is in the wrong section, feel free to move.
Tools required: 9006/HB4 bulbs (not pictured), Flat head, 10mm, and a good pair of hands
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
![Name: DSC00985.jpg
Views: 7295
Size: 18.5 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440778d1501409887-diy-gs-fog-light-replacement-dsc00985.jpg)
1) Turn on your car and turn you wheels toward the opposite direction of the side you want to start on.
2) Turn the following two clips 45 degrees clockwise and with you nails, gently pry the clips out. They do require excessive force but be careful not to break the clips
![Name: DSC00978.jpg
Views: 7207
Size: 26.7 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440779d1501409887-diy-gs-fog-light-replacement-dsc00978.jpg)
![Name: DSC00979.jpg
Views: 7195
Size: 15.8 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440780d1501409887-diy-gs-fog-light-replacement-dsc00979.jpg)
![Name: DSC00980.jpg
Views: 7160
Size: 16.0 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440781d1501409887-diy-gs-fog-light-replacement-dsc00980.jpg)
The clips removed should look like this.
![](http://i4.photobucket.com/albums/y146/itsm1tch3ll/GS%20fog%20light/DSC00981.jpg)
The following 2 users liked this post by l4wr3nc3:
skur (12-25-23),
Ssanchez85 (05-26-21)
#2
Driver
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
3) Next, remove these two bolts with the 10mm socket
![Name: DSC00962.jpg
Views: 6847
Size: 41.6 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440774d1501409887-diy-gs-fog-light-replacement-dsc00962.jpg)
4) Right underneath the car infront of the wheels you will see 3 bolts, remove the one that is more towards the outside of the vehicle.
![Name: DSC00975.jpg
Views: 6862
Size: 40.8 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440775d1501409887-diy-gs-fog-light-replacement-dsc00975.jpg)
5) With quite an amount of force, push the fender liner toward the inside of the car.
![Name: DSC00982.jpg
Views: 6930
Size: 26.6 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440776d1501409887-diy-gs-fog-light-replacement-dsc00982.jpg)
After pushing the fender liner out, it should look like this (arrows pointing toward the removed clips)
![Name: DSC00962.jpg
Views: 6847
Size: 41.6 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440774d1501409887-diy-gs-fog-light-replacement-dsc00962.jpg)
4) Right underneath the car infront of the wheels you will see 3 bolts, remove the one that is more towards the outside of the vehicle.
![Name: DSC00975.jpg
Views: 6862
Size: 40.8 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440775d1501409887-diy-gs-fog-light-replacement-dsc00975.jpg)
5) With quite an amount of force, push the fender liner toward the inside of the car.
![Name: DSC00982.jpg
Views: 6930
Size: 26.6 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440776d1501409887-diy-gs-fog-light-replacement-dsc00982.jpg)
After pushing the fender liner out, it should look like this (arrows pointing toward the removed clips)
![Name: DSC00983.jpg
Views: 6821
Size: 38.9 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440777d1501409887-diy-gs-fog-light-replacement-dsc00983.jpg)
The following 2 users liked this post by l4wr3nc3:
petershen (02-17-23),
Ssanchez85 (05-26-21)
#3
Driver
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
6) With the fender pushed aside, you should be able to see the fog light bulb
![Name: DSC00965.jpg
Views: 7743
Size: 33.9 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440771d1501409887-diy-gs-fog-light-replacement-dsc00965.jpg)
7) Gently turn the fog light bulb and pull it out. Once out, push the red tab circled in the following photo down and this will allow you to remove the OEM bulb easily. If it requires a lot of force, then you did not push it down far enough. Then simply plug the new aftermarket bulb in
![Name: DSC00966.jpg
Views: 6979
Size: 27.1 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440772d1501409887-diy-gs-fog-light-replacement-dsc00966.jpg)
new bulb OEM
![Name: DSC00965.jpg
Views: 7743
Size: 33.9 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440771d1501409887-diy-gs-fog-light-replacement-dsc00965.jpg)
7) Gently turn the fog light bulb and pull it out. Once out, push the red tab circled in the following photo down and this will allow you to remove the OEM bulb easily. If it requires a lot of force, then you did not push it down far enough. Then simply plug the new aftermarket bulb in
![Name: DSC00966.jpg
Views: 6979
Size: 27.1 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440772d1501409887-diy-gs-fog-light-replacement-dsc00966.jpg)
new bulb OEM
![Name: DSC00976.jpg
Views: 6779
Size: 23.3 KB](https://www.clublexus.com/forums/attachments/gs-3rd-gen-2006-2011/440773d1501409887-diy-gs-fog-light-replacement-dsc00976.jpg)
The following users liked this post:
Ssanchez85 (05-26-21)
The following 5 users liked this post by l4wr3nc3:
hunterhill (03-21-22),
Molivacce (05-03-22),
petershen (06-16-18),
Ssanchez85 (05-26-21),
wichitp (08-29-17)
#7
Driver
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
haha thanks, when i first started working on midnightgs's car, i really didnt know what i was doing. Of course he didnt know that
. But the procedure is pretty much the same for my BMW and for other cars as well so it was fairly simple to figure out.
Nightime shots will be posted in a few once the sun goes down. Again, if you guys have any questions, feel free to let me know.
![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
Nightime shots will be posted in a few once the sun goes down. Again, if you guys have any questions, feel free to let me know.
Trending Topics
#9
Driver
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Yea, we tried doing it without removing the bolts but moving/bending the fender liner was too hard. It was just much easier removing the two bolts. It gave us a lot of space to work with.
#12
Lexus Test Driver
Join Date: Oct 2006
Location: Colorado
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
if you went to all the trouble of replacing your fog lights, why didn't you also just convert and add the HID kit for them as well.
That will make the real difference.
That will make the real difference.
#14
Lexus Test Driver
Join Date: Oct 2006
Location: Colorado
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
#15
Driver
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
HID kit = 300+
The factory lighting is sufficient. Theres no need for HID fogs besides looks. Personally, i would have went with HID fogs myself, but it's his car and he just wanted the fog color to match that of the low beam.