hub centering rings on aftermarket wheels
#16
Master Thread Closer!!
iTrader: (33)
Join Date: Jul 2002
Location: Waipahu, Waikele, HI
Posts: 9,859
Likes: 0
Received 9 Likes
on
9 Posts
IMO...its a must to have hubcentric rings and core.
And if you add spacers to push the wheels out....the spacers should have hubcentric core....like H&R spacers...all of their spacers 10 mm + have hubcentric cores built in.
If you buy Project Kics spacers...the hubcentric cores are sold separately.
Not having hubcentric rings/cores can lead to uneven tire wear, vibration, etc...
I rather spend a bit more now....than have a bigger problem later.
Pete
And if you add spacers to push the wheels out....the spacers should have hubcentric core....like H&R spacers...all of their spacers 10 mm + have hubcentric cores built in.
If you buy Project Kics spacers...the hubcentric cores are sold separately.
Not having hubcentric rings/cores can lead to uneven tire wear, vibration, etc...
I rather spend a bit more now....than have a bigger problem later.
Pete
#17
Lexus Fanatic
iTrader: (1)
I've been using hub rings about 20 years now and the only time I had a problem it was the fault of the wheel, not the ring. Hub rings work well if the wheel is the right fitment.
Twice I've tried wheels that were originally drilled for Benz fitment; had them redrilled for Lexus and never got them balanced perfectly to my satisfaction. SOme would have accepted them but not me. Couldn't blame the rings. The same exact rings worked perfectly with wheels designed to fit the car.
Naturally, wheels designed to be hubcentric without rings are the best but rings are perfectly safe and work well.
Twice I've tried wheels that were originally drilled for Benz fitment; had them redrilled for Lexus and never got them balanced perfectly to my satisfaction. SOme would have accepted them but not me. Couldn't blame the rings. The same exact rings worked perfectly with wheels designed to fit the car.
Naturally, wheels designed to be hubcentric without rings are the best but rings are perfectly safe and work well.
#18
Lexus Champion
iTrader: (3)
Join Date: Oct 2007
Location: FL
Posts: 3,003
Likes: 0
Received 0 Likes
on
0 Posts
Go back and get your wheels rebalanced at another place, ask them to place it on the machine and check it before they redo the balancing if its off.
After getting my rings going from zero to 110+ was smooth, it actually got smoother as I went 80+. 100+ was butter.
#19
Lexus Champion
iTrader: (28)
Na, the vibration isn't much, not anymore that is, just a little bit. Also I think it could just be the extra road feel from really low profile tires and high psi. But the guy installing it he balanced it to all 0 but one wheel had a small "hop" to the rotation of it. I'm thinking it was improper tire mounting or an out of round tire. What you guys think? Hehe, I'm going to Vegas for Thanksgiving so I'd like to have nice peace of mind!
#20
Driver
Thread Starter
Join Date: Oct 2008
Location: Guam
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
It's not "possible vibration", but "sure vibration" without hub rings. I've tried hub rings in my 7-series and still had vibrations at, let's say, 15% remaining and around 40-50mph that wouldn't go away despite changing all suspension and steering components to new. This is the reason why I was kind of hesitant to go to non-hubcentric aftermarket wheels for my GS (which is all I can find for my car) and would like to hear more from those who have used hub rings if anyone mirrors my experience.
#21
Lexus Champion
iTrader: (3)
Join Date: Oct 2007
Location: FL
Posts: 3,003
Likes: 0
Received 0 Likes
on
0 Posts
Na, the vibration isn't much, not anymore that is, just a little bit. Also I think it could just be the extra road feel from really low profile tires and high psi. But the guy installing it he balanced it to all 0 but one wheel had a small "hop" to the rotation of it. I'm thinking it was improper tire mounting or an out of round tire. What you guys think? Hehe, I'm going to Vegas for Thanksgiving so I'd like to have nice peace of mind!
#22
Driver School Candidate
Dumb question or not?
Forgive me if this is a dumb question, I'm not the brightest light in the room. When running a wheel that requires a centering ring does this put more pressure, or worst yet all the pressure on the studs or does the ring itself absorb some of the weight?
#23
exclusive matchup
iTrader: (4)
no, the rings are there to help you center the wheel, so all the lug nuts are tightened onto the studs with equal force. actually if done right, there shouldn't be much force on the rings at all, it's just for alignment
on the other hand, if you don't use rings, then when you tighten lugs, you do put a lot more uneven force on the studs/lugs
on the other hand, if you don't use rings, then when you tighten lugs, you do put a lot more uneven force on the studs/lugs
#24
Lexotic Concepts
iTrader: (1)
My TOM's Racing wheels for the GS are made for the GS350 so they are hubcentric from the manufacturer. (They are now for sale in Wheels Classifieds) Every other wheel I have owned, I have purchased hubcentric adapter rings. (Why would you NOT do this for a few more bucks?) it makes a huge difference and reduces any chance of vibrations.
#25
Lexus Fanatic
iTrader: (3)
hub rings arent techincally needed but its a very good idea to have them. like others have mentioned it centers the wheel on the hub instead of the lugs which puts the weight and stress on the hub which is much stronger than the studs. if you dont run hub rings you can get vibrations and you run a much higher risk of shearing studs off. you can shear studs off with hub rings too but it doesnt have to do with the hub rings. its usually people who cross thread their lugs by mistake.
Thread
Thread Starter
Forum
Replies
Last Post
2017FSport
RC - 1st Gen (2015-present)
6
04-01-19 05:39 PM
gtmassive
IS - 3rd Gen (2014-present)
2
03-31-16 05:39 AM
st350z
CT 200h Model (2011-2017)
2
07-26-12 09:14 AM