3GS wheel thread
11-23-10, 10:39 PM
#376
Do you guys think a 19x9.5 +33 & 19x10.5 +37 would work without mods? The tire sizing will be 225 40 19 & 255 35 19. I found a good deal on some wheels but offset MIGHT be too aggressive perhaps. Just want to see if anyone has ran offsets like that.
11-24-10, 12:27 PM
#379
11-28-10, 05:01 PM
#380
Vossen VVS-082
Black Machined
20x9 / 20x10.5
Black Machined
20x9 / 20x10.5
11-28-10, 10:04 PM
#381
Driver School Candidate
Join Date: Oct 2010
Location: CA
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Wheel question
Hey guys, I recently bought a 2006 GS 430 and am considering the following wheel sizes:
20x9.5 +38
20x10.5 +38
I will be dropped on Tanabe pro 5 and will most likely need a little stretching of the tires.
Do you forsee lots of fender work for this set up? Any feedback is appreciated.
Thanks!
20x9.5 +38
20x10.5 +38
I will be dropped on Tanabe pro 5 and will most likely need a little stretching of the tires.
Do you forsee lots of fender work for this set up? Any feedback is appreciated.
Thanks!
11-28-10, 11:08 PM
#382
I test fitted similar +37 offset of the same width and they stuck out of the fender too much. I'm certain some fender trimming is in order if you want to run 275s. It might I mean it might work with a 255 rear but it might look a little funky combined with a 225 35 20 front.
Hey guys, I recently bought a 2006 GS 430 and am considering the following wheel sizes:
20x9.5 +38
20x10.5 +38
I will be dropped on Tanabe pro 5 and will most likely need a little stretching of the tires.
Do you forsee lots of fender work for this set up? Any feedback is appreciated.
Thanks!
20x9.5 +38
20x10.5 +38
I will be dropped on Tanabe pro 5 and will most likely need a little stretching of the tires.
Do you forsee lots of fender work for this set up? Any feedback is appreciated.
Thanks!
12-01-10, 09:12 AM
#383
Driver School Candidate
Join Date: Oct 2010
Location: CA
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
Thanks for your input username32. I entered the information into an online wheel calculator. It appears the factory 18" wheel is 18x8 +45 all around.
The rear sizing for a 20x10.5 +38 would yield an additional 39mm (about 1.5 inch) further out. I would most likely need to run a 245 or 255 to prevent rubbing, however, I am willing to shave my rear fenders a little to compensate.
The rear sizing for a 20x10.5 +38 would yield an additional 39mm (about 1.5 inch) further out. I would most likely need to run a 245 or 255 to prevent rubbing, however, I am willing to shave my rear fenders a little to compensate.
I test fitted similar +37 offset of the same width and they stuck out of the fender too much. I'm certain some fender trimming is in order if you want to run 275s. It might I mean it might work with a 255 rear but it might look a little funky combined with a 225 35 20 front.
12-01-10, 06:34 PM
#384
Drop: Lexus F-Sport Springs
Front: MRR HR2 8.5" Silver Machined Finish +35 offset
245/35/20
Back: MRR HR2 9.5" Silver Machined Finish +40 offset
275/30/20
Crappy iPhone pics.....
Front: MRR HR2 8.5" Silver Machined Finish +35 offset
245/35/20
Back: MRR HR2 9.5" Silver Machined Finish +40 offset
275/30/20
Crappy iPhone pics.....
12-02-10, 01:27 PM
#385
Driver School Candidate
Join Date: Oct 2010
Location: CA
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
12-03-10, 06:40 AM
#386
JMTAMU.....Now that's what im talkin' bout'!!!! Very NICE.....let's see some more pics....in daylight with better weather....Thumbs Up.
12-04-10, 10:43 AM
#387
Driver School Candidate
Join Date: Dec 2010
Location: TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone seen a new GS with the Gianelle Santorini wheels in black? If so, could you direct me to the pics? I'm considering these for my next wheel but can't find a good configurator to display them on the car.
http://www.streetdreams.org/wheels/g...rini_black.jpg
http://www.streetdreams.org/wheels/g...rini_black.jpg
Last edited by bskrilla; 12-04-10 at 10:46 AM.
12-04-10, 03:42 PM
#388
Has anyone seen a new GS with the Gianelle Santorini wheels in black? If so, could you direct me to the pics? I'm considering these for my next wheel but can't find a good configurator to display them on the car.
http://www.streetdreams.org/wheels/g...rini_black.jpg
http://www.streetdreams.org/wheels/g...rini_black.jpg
12-09-10, 09:39 AM
#390
Driver School Candidate
Join Date: Dec 2010
Location: TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
has anyone seen a legitimate picture (non-Lumarai configurator site) of the black Lumarai Morro, 20's on a 3g? The silver ones look awful but I'm considering the black...