When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I orginally bought a set of 19" Work Euroline DZ for another car that I had, but now I recently brought home a '06 GS300 AWD. Kinda wish I did my research and looked for a RWD. Anyways I'm trying to get opinions on how the offsets would look on the car. The offsets are 19x8+35 and 19x9+30, and if need be I'll add some spacers. Here is pic of actual rims. Thanks in advance.
with 8 and 9, umm.... maybe i will do 235/35 and 265/30. a bit on the small side but the wheels are narrow so personally i try not to put 245/35 and 275/30
with 8 and 9, umm.... maybe i will do 235/35 and 265/30. a bit on the small side but the wheels are narrow so personally i try not to put 245/35 and 275/30
would that be a good fit? i'm trying to stretch the tires, so it'll have that aggresive look
9+30 is the same as 10+42, if you use 265 tires i think it will be ok
9 +30 is near identical to 10 +42. When you say it will be ok, meaning without any modification to the fender/wheel wale inner plastic or clips? knowing when compare to stock, a 265 tire is 10mm more & the wheel is about 28mm more to each side of the wheel/tire?
I ask because I had a 20mm spacer on the rear stock 18" wheels and 245/40 tires but it rubs a bit when hit big bumps. I downgraded to 15mm then no rub at all. My GS is slightly lowered and No fender mods.