When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Damn I didn't know it was going to be that involved to remove the headliner.
hmmmmm
I think if your install knows what he/she is doing he/she should able to wrap the "Shark Fin" without any problem.
Here is what I would tell him/her to do:
1. wrap the roof and leave an opening for the "Shark Fin";
2. wrap the "Shark Fin" from Top-Front, use hair dryer to heat, shape, and strach the vinyl (same process when installing the clear bra), then carefully use the sharp blade to trim out the excessive vinyl!!!
After all these talk about "Shark Fin", now I am in the mood for "Shark Fin Soup"!!! Going to call-in for special order, and pick them up on the way home!!!
I am going to "practice" first on maybe the SC 400 or 2GS before I attempt the 3GS....3GS has airbags up top so not sure how that will work but seems its not an issue.
Do you remember that BMW at MIR that was completely wrapped? That thing was fugly ever since I have been turned off the whole vinyl wrap trend
Yeh that thing was poorly done
Originally Posted by 1SICKLEX
I am going to "practice" first on maybe the SC 400 or 2GS before I attempt the 3GS....3GS has airbags up top so not sure how that will work but seems its not an issue.
Practice will help a lot when you want to do it to the GS. It comes off either way though.
Originally Posted by jre002
Good thing. Your car is clean as is. I hate the black roof wrap/paint fad.
I was going to do this and install the sharkfin on my car but opted not to. 
08-26-09, 12:34 PM
