xmike714x

iTrader: (1)

just had mine replaced by the dealership since my car is still under warrenty.

ivanz

Someone should get the diametre/number of notches for each plastic gear and try to find a metal equivilent.

austinGS

Could we know how many miles/years on your car before the mirrors went out?
I like the tilt feature and think its great help to keep my rims safe. As long as it goes out before 5 yr and 50K, I am happy. Then after warranty runs out, I stop using the tilt.

ivanz

It really depends on a bunch of factors. Mine went out after 10,000 miles a couple months ago. I shift into reverse a bunch of times each day though...

IXI187IXI

iTrader: (3)

theres a lot more to gears then diameter and number of teeth

jayse79

I got both mine changed not too long ago as well, which was covered under extended warranty. At first the problem was intermittent on the driver's side and then the same with the passenger's side. Eventually they both stopped working. Now both my mirrors tilt down when I reverse.

B.Diddy

iTrader: (1)

I am having this same problem now..... I don't understand how or why it manually can be corrected but switching from Reverse to Drive the mirrors never return to the correct location. I guess I am pushing the mirror button long enough for the gears to catch? This becomes very annoying as I reverse out my driveway daily.

memasterac

FYI, my has the same problem too and was replaced by Lexus with the extended warranty. Driver side too.

B.Diddy

iTrader: (1)

I wonder if they will issue a TSB for this? I find this hard to believe that the gears could strip that easily or does anyone know how to prevent the mirrors from auto tilting? maybe pull a fuse or relay associated with engaging reverse? I dunno.

worker

from what I understand all the gears inside the mirrors are plastic. It will wear out I'm sure lexus know that. But it's almost a sure thing that you can't wear it out within the warranty period.

Boron

Is it a fact that the gears that are at fault?
What about the motor that turns the gears?
Or the shaft the gears and motor are attached to?
I'd be more inclined to lean towards an electric motor and/or shaft issue - especially if it tilts down in reverse, but doesn't return to its previous position when taken out of reverse.

worker

open urs up and find out. :-)

tunedis95

I have the same issue super annoying...This was as close as I got to those gears. Maybe I can take that spare apart.

https://www.clublexus.com/forums/gs-...ix-update.html

worker

they might get worn down.

my old camry had an antenna auto roll up/down...that gear got worn so bad it can't roll up. i couldn't believe it was made out of plastic. but than i couldn't believe it worked more than 3 years.

projectsle

I'm at about 30k miles on my GS and this problem has been going on for a while. When you went to the dealership did you mention a specific TSB/TSIB number?