kitphat

i have a 06 gs300 non navi. wanted to know if anyone has put this in their car and see if its worth ordering? Also will it play video on my deck too?

EyeKutr

iTrader: (5)

I recently installed it for a member, if you do the dvd and nav bypass, it will indeed play video. Works well. If you order it, I can tell you what you will have to do, basically you to the yellow wire mod and cut the pink wire, see the link in my sig

rominl

iTrader: (4)

i have recently done an 06 gs without nav as well with sl2vi, works very well and video plays great like eyekutr said

kitphat

I found another kit for cheaper. It's called the toypd2. They say it's the same as the vais kit but the toypd2 is way cheaper. Anyone care to comment on the toypd2??

kitphat

Ey rominl did u have to hook up the switch too. Cuz I have a 06 non navi gs too or is it just plug and play for us??

EyeKutr

iTrader: (5)

you wont need a swicth, but you will have to cut 2 wires....the unit itself is plug and play, but you have to fool it to think the car is not moving and parking brake is on....hence 2 wires are cut

rominl

iTrader: (4)

http://www.vaistech.com/products/unath_res.php

^^^ this will answer your question on the toypd2 thing

also, it's only audio and doesn't have video like the sl2vi

like eye said, it's plug and play, but if you want to have full controls and enable video when car is moving, you either need to do wire cutting, or you need override kit. i have override kit

kitphat

How much was the override kit?? And where can I get one??

rominl

iTrader: (4)

for me i got it from ps, chung@prestigioussociety.com

it's not cheap, it allows you to use the nav and enable video when driving, all plug and play so it's safer. but a lot of members do the wire cutting and put in a switch.

EyeKutr

iTrader: (5)

he wont need a switch for his bypass, in fact his is the easiest bypass since he has no nav or ML

kitphat

So I don't need a switch?? I just plug and play the vais??

rominl

iTrader: (4)

oh he doesn't have nav, i missed that part, sorry. then in that case, just gnd the parking break and cut the speed sensor wire and that should do it?

kitphat, vais is always plug and play, but what eye and i are talking about is how to enable video and song info when you are driving

EyeKutr

iTrader: (5)

Exactly Henry... just gnd the parking break and cut the speed sensor wire ....

Rudy

rominl

iTrader: (4)

yeah, for non-nav cars, i think that's probably the easiest way.

XxGoKoUxX

took me 15 minutes to do my whole car from start and finish of the install... very very easy =] you just look at the wires, cut'em and ur good to go =]