My'GS_430/Work Varianza SC1
#1
My'GS_430/Work Varianza SC1
Just got them installed.. finally got some time to posted some pics after 7 hours of cut/trim/rolled... thanks to "97soarer" for the wheels and the help from Henry...
Varianza Schwert SC1 20 inch 2 Piece/Full Reverse
F: 20x8.5+38 Standard A Disk - 2.75" lip
R: 20x10.5+45 Deep Dish O Disk - 3.5" lip
Tires: Toyo T1R F:245/35/20 R:275/30/20
F: 20x8.5+38 Standard A Disk - 2.75" lip
R: 20x10.5+45 Deep Dish O Disk - 3.5" lip
Tires: Toyo T1R F:245/35/20 R:275/30/20
#5
I'd installed 5mm spacers for the front wheels in order for them to clear the brake caliper Henry.. front/rear all shave and trim complete to the wall..may have to add another 10mm to the rear to make them sit Flush.. to bad the front tires are not stretched.. even i'd shave the fender all the way to the wall already but they still rub when making a full turn though.. Now i've to wait until these tires to worn out abit then i can get some stretched tires
Last edited by 3GS404; 07-03-10 at 12:14 AM.
Trending Topics
#13
exclusive matchup
iTrader: (4)
I'd installed 5mm spacers for the front wheels in order for them to clear the brake caliper Henry.. front/rear all shave and trim complete to the wall..may have to add another 10mm to the rear to make them sit Flush.. to bad the front tires are not stretched.. even i'd shave the fender all the way to the wall already but they still rub when making a full turn though.. Now i've to wait until these tires to worn out abit then i can get some stretched tires
and looking at the pics, yeah, when stretching tires, can use more spacers i think.