When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just got them installed.. finally got some time to posted some pics after 7 hours of cut/trim/rolled... thanks to "97soarer" for the wheels and the help from Henry...
Varianza Schwert SC1 20 inch 2 Piece/Full Reverse
F: 20x8.5+38 Standard A Disk - 2.75" lip
R: 20x10.5+45 Deep Dish O Disk - 3.5" lip
Tires: Toyo T1R F:245/35/20 R:275/30/20
I'd installed 5mm spacers for the front wheels in order for them to clear the brake caliper Henry.. front/rear all shave and trim complete to the wall..may have to add another 10mm to the rear to make them sit Flush.. to bad the front tires are not stretched.. even i'd shave the fender all the way to the wall already but they still rub when making a full turn though.. Now i've to wait until these tires to worn out abit then i can get some stretched tires
Here u go Mike.. i'll try to take some pixs at "Ride Height" later on today.. hey Mike..did u successful install the custom cambers arm for the rear wheels?? can u take some pixs of them? thanks
I'd installed 5mm spacers for the front wheels in order for them to clear the brake caliper Henry.. front/rear all shave and trim complete to the wall..may have to add another 10mm to the rear to make them sit Flush.. to bad the front tires are not stretched.. even i'd shave the fender all the way to the wall already but they still rub when making a full turn though.. Now i've to wait until these tires to worn out abit then i can get some stretched tires
rubbing when making full turn is ok, you won't be going very fast at that speed anyway
and looking at the pics, yeah, when stretching tires, can use more spacers i think.
I'll definitely get stretched tires for my next set of tires.. these tires are killing my fenders.... any body out there wanna swap w/my front tires? they're 'bout 70% tread life left..