McGard Splinedrive kit question
#1
Lexus Test Driver
Thread Starter
iTrader: (11)
Join Date: Jun 2009
Location: NY
Posts: 889
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Is this the correct kit I would need?
part # 65557BK
http://www.amazon.com/McGard-65557BK...4299195&sr=1-1
I also want to know if this is all I need to install them on my car with my aftermarket wheels? I already have a breaker bar.
If you check here it seems to match up, but I just want to make sure
http://www.mcgard.com/Applications/A...59oK1ZwQ%3d%3d
part # 65557BK
http://www.amazon.com/McGard-65557BK...4299195&sr=1-1
I also want to know if this is all I need to install them on my car with my aftermarket wheels? I already have a breaker bar.
If you check here it seems to match up, but I just want to make sure
http://www.mcgard.com/Applications/A...59oK1ZwQ%3d%3d
#6
Lexus Test Driver
Thread Starter
iTrader: (11)
Join Date: Jun 2009
Location: NY
Posts: 889
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I'm hoping this will fix my high speed vibrations on my aftermarkets..last summer I got wheel balance, wheel alignment, n still had vibrations. I was told it was my generic lug nuts
Trending Topics
#11
Lexus Fanatic
iTrader: (3)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
for example lets say your wheels have a 73mm center bore, then you would order hub rings that are an ID (inner diameter) of 60.1mm (lexus hub size) and an OD (outer diameter) of 73mm (to match the center bore).
9 times out of 10 when people get after market wheels this is why they have vibrations at high speeds. they usually do not order hub rings.
#12
Lexus Test Driver
Thread Starter
iTrader: (11)
Join Date: Jun 2009
Location: NY
Posts: 889
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I just received my kit this weekend and i noticed the installation tool does not fit on my breaker bar or on the socket that i usually use with my breaker bar. Any suggestions on what I need to make this work so i can put my wheels on?
#14
Lexus Test Driver
Thread Starter
iTrader: (11)
Join Date: Jun 2009
Location: NY
Posts: 889
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
how about you other guys that use mcgard splinedrive? Do you use the 4 way tire irons or something else?
EDIT: used the 4 way tire iron..worked fine
EDIT: used the 4 way tire iron..worked fine
Last edited by Lex Luga; 05-08-11 at 09:19 PM.