Murder was the case!!!
09-26-11, 09:36 AM
#64
I pride myself on always being on top of my game
, I had longer studs from installing V1 Ichiba 10mm spacers all around, I wanted to tie the car into the wheels but didn t want to have the black on the rim so I decided to get black, extended, open end, lugs so just incase the studs were too long I had extended studs with open ends i also had rear Megan camber arms on
hand when we installed them just incase they were to aggressive, I absolutely didn t want a fender roller to touch my car. The Work wheels are what you see no spacers but had to roll with the 5s on the Black wheels but switching from one set up to the next is simple and they are both money!!
, I had longer studs from installing V1 Ichiba 10mm spacers all around, I wanted to tie the car into the wheels but didn t want to have the black on the rim so I decided to get black, extended, open end, lugs so just incase the studs were too long I had extended studs with open ends i also had rear Megan camber arms onhand when we installed them just incase they were to aggressive, I absolutely didn t want a fender roller to touch my car. The Work wheels are what you see no spacers but had to roll with the 5s on the Black wheels but switching from one set up to the next is simple and they are both money!!
10-13-11, 08:33 PM
#66
Lexus Test Driver
iTrader: (11)
Join Date: Jun 2009
Location: NY
Posts: 889
Likes: 0
Received 0 Likes
on
0 Posts
I know u sold the fujita short ram intake, did u ever get another intake? Im tryna figure out my options as there are not many for the gs300. Might just have to search harder for that SRT intake from the 2GS
