NF210 Vossen VVSCV7 295/25&245/30 Fitment
#1
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: May 2013
Location: CA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
NF210 Vossen VVSCV7 295/25&245/30 Fitment
sup guys. im new to this forum and havent quite figured out how to navigate around here. also, im new to this car stuff. ive owned trucks for as long as i been driving. traded in my tundra recently for a 2010 GS450H. heres my build on my truck if interested. http://www.tundratalk.net/forums/tun...tml#post687660.
ok so i just have a few fitment questions for the experts. i have some tanabe nf210 waiting to be installed soon and im in process of looking for wheels/tires to go with it. im looking at the Vossen VVSCV7 20x9 +38mm offset front and 20x10.5 +45mm offset running them with 245/30 and 295/25 tires. will i have any issues with rub?? i do not want to do any trimming or fender rolling on my car. ive dealt with all that on my previous trucks already. any input will be greatly appreciated. thanks!
ok so i just have a few fitment questions for the experts. i have some tanabe nf210 waiting to be installed soon and im in process of looking for wheels/tires to go with it. im looking at the Vossen VVSCV7 20x9 +38mm offset front and 20x10.5 +45mm offset running them with 245/30 and 295/25 tires. will i have any issues with rub?? i do not want to do any trimming or fender rolling on my car. ive dealt with all that on my previous trucks already. any input will be greatly appreciated. thanks!
#5
Former Sponsor
sup guys. im new to this forum and havent quite figured out how to navigate around here. also, im new to this car stuff. ive owned trucks for as long as i been driving. traded in my tundra recently for a 2010 GS450H. heres my build on my truck if interested. http://www.tundratalk.net/forums/tun...tml#post687660.
ok so i just have a few fitment questions for the experts. i have some tanabe nf210 waiting to be installed soon and im in process of looking for wheels/tires to go with it. im looking at the Vossen VVSCV7 20x9 +38mm offset front and 20x10.5 +45mm offset running them with 245/30 and 295/25 tires. will i have any issues with rub?? i do not want to do any trimming or fender rolling on my car. ive dealt with all that on my previous trucks already. any input will be greatly appreciated. thanks!
ok so i just have a few fitment questions for the experts. i have some tanabe nf210 waiting to be installed soon and im in process of looking for wheels/tires to go with it. im looking at the Vossen VVSCV7 20x9 +38mm offset front and 20x10.5 +45mm offset running them with 245/30 and 295/25 tires. will i have any issues with rub?? i do not want to do any trimming or fender rolling on my car. ive dealt with all that on my previous trucks already. any input will be greatly appreciated. thanks!
Hey Pngo121
I sent you a message so check your PM
As for the Vossen CV7 wheels
those are the right specs
20x9 + 38
20x10 +45
you can even run a 20x9 +32 for the front which will give you a more flush look. Most of the GS vehicles will run a 20x9 +32 on the front to give it that nice aggressive look especially when they are lowered.
As for tire specs
the recommended tire sizes in which you wont have any rub and you will not have to roll or pull your fenders would be:
245/35/20
285/30/20
this way there is no rubbing on any turns/ bumps/ dips and ETC and you also have a nice amount of tire to protect the lip and rim itself.
For the 295/25/20
Once you lower your car on the Tanabe springs and you want to run the 295/25/20 you will rub and it will be rougher.
check this GS430 we did on Vossen CV7 wheels
NO RUB!!!!
With the same setup i just stated above
Thread
Thread Starter
Forum
Replies
Last Post
dnguyen823
IS - 3rd Gen (2014-present)
2
09-10-15 09:46 PM
jmtamu
GS - 4th Gen (2013-2020)
26
03-20-14 11:00 AM