:: 20" rims rear rubbing ::
#16
executive matchup
![](https://www.clublexus.com/forums/images/ranks/rank-mod2.gif)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
the only other possibility is that the wheel manufacturer mislabeled the wheel, saying it is a +45 offset when in fact it isn't.
#18
Driver School Candidate
Thread Starter
Join Date: Jan 2010
Location: Wicklow
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Hi,
Sorry for the delay. I checked fronts and rears and they are as follows:
front - 8.5X20 5/114 ET35
rear - 9.5x20 5/114 ET35
The fenders have been shaved already.
Thanks
Sorry for the delay. I checked fronts and rears and they are as follows:
front - 8.5X20 5/114 ET35
rear - 9.5x20 5/114 ET35
The fenders have been shaved already.
Thanks
#19
executive matchup
![](https://www.clublexus.com/forums/images/ranks/rank-mod2.gif)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
well there's your problem! +35 offset is way too aggressive, and is the reason you are rubbing. you need to take your wheels back to your wheel vendor and ask them either to exchange for the correct offset or give you a refund. selling wheels that don't fit is just wrong.
#20
Driver School Candidate
Thread Starter
Join Date: Jan 2010
Location: Wicklow
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I regret that I didn't ask that question 8 months ago when I bought the rims. Exchange it's not the option at this stage :-(
What other option would work for me now? Smaller tyres?
Thanks
What other option would work for me now? Smaller tyres?
Thanks
#21
executive matchup
![](https://www.clublexus.com/forums/images/ranks/rank-mod2.gif)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
it's hard to say whether or not narrower tires (275) will fit better or not. looking at the 4th picture you posted, its clear that your rim extends past your fender, so a narrower tire (imho) still won't solve the problem and you would still have rubbing problems. but i'll let the wheel gurus here advise you as i'm no wheel/tire fitment expert.
the most expensive option for you now would be to sell your wheels, and buy wheels that have the correct offset. if you want to lower your car without fender modification, this is probably the best route to take.
alternatively, you can have a bodyshop roll your fenders so that your wheels will fit.
the most expensive option for you now would be to sell your wheels, and buy wheels that have the correct offset. if you want to lower your car without fender modification, this is probably the best route to take.
alternatively, you can have a bodyshop roll your fenders so that your wheels will fit.
#23
Lexus Champion
iTrader: (28)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
^^ be careful if you roll your fenders because the paint may chip if you don't heat it up well or go slow. Like I said in my first post shave the rear and go skinnier tires. You'll stop rubbing. 20x9.5 +35 isnt really that aggressive compared to some of the fitment the VIP guys rock! You can still make these wheels work.
#24
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I mean it, Ireland is very poor with real machine shops and other stuff related to tuning. I started buying tools and I usually do the basic repair/maintenance by myself.
Going back to the rims, I'll take them off tomorrow and check the offset. Thanks a million for all valuable info so far and prompt replies guys.
Going back to the rims, I'll take them off tomorrow and check the offset. Thanks a million for all valuable info so far and prompt replies guys.
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
well there's your problem! +35 offset is way too aggressive, and is the reason you are rubbing. you need to take your wheels back to your wheel vendor and ask them either to exchange for the correct offset or give you a refund. selling wheels that don't fit is just wrong.
You have to also consider rafi, you said there is ZERO support for modifications out there. a thinner tire on a properly spec'd wheel is almost impossible to find up in west Virginia in my brother's residence. Make sure you find a shop that will stretch your tires for you if you want to consider going that route.
#25
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
We are talking about less then a half inch difference here from what he was suppose to receive. A skinnier tire with a slighty taller side wall "should" fix your problem. Skinnier then a 275 like previously stated. Yes a camber kit will help greatly as well if you don't wanna swap out your tires. Yes your tires will wear quicker. But if your toe alignment is spot on, it won't wear as quickly as you think. At my drive height(I'm on air), my fronts are at around -5 degrees of camber. My tires still look good after a year and a half of driving. My rears are another story.
Last edited by 3gsJaayyyy; 10-06-13 at 02:56 AM.
#26
Driver School Candidate
Thread Starter
Join Date: Jan 2010
Location: Wicklow
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
What about that one - http://www.nicoclub.com/archives/fen...ng-how-to.html ?
The tool is like $100 plus heatgun and IR thermometer.
The tool is like $100 plus heatgun and IR thermometer.
#27
executive matchup
![](https://www.clublexus.com/forums/images/ranks/rank-mod2.gif)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
What about that one - http://www.nicoclub.com/archives/fen...ng-how-to.html ?
The tool is like $100 plus heatgun and IR thermometer.
The tool is like $100 plus heatgun and IR thermometer.
If you are keen on going this route, I would recommend you practice on a junk car (or two) and see if you can roll the fender properly. That way if you mess up, you won't damage your own car. 2 cents.
Thread
Thread Starter
Forum
Replies
Last Post