Synch

I'm in EU, Estonia!

Do they send it to me? Can anyone give me part number?

ibidu1

iTrader: (1)

https://fastbox.su/pompa-oleju-56010...679952318.html

https://www.avito.ru/moskva/zapchast...0032_367260335

https://hl24.eu/wrn.php?daten=351243

https://www.tlsautorecycling.com/sea...0h/391534.html

ibidu1

iTrader: (1)

I dont see why not, if anything if they do not ship outside of the US. Have them ship it to a shipping forwarder in the US. All you will need is there US address and they ship it to you.

I know https://www.aramex.com can do that, they have there prices on the website

Synch

They do not have it

Lwerewolf

I only see one severed connection on that picture. The other (I assume) interesting part of it is blurred.

Synch

Can anyone make me a picture of the severed connection plug? I want to see how the colors are matched.

The severed connection plug is this




The pump plug is this

ibidu1

iTrader: (1)

This guy in the UK claims he can rebuild those pumps

http://www.manyautosltd.com/abs


http://carlthomas66.blogspot.com/201...-oil-pump.html

Synch

Bought myself a 2008 GS450h oil pump from Poland. It was with postage 285€ so it wasn't cheap.

I really hope it helps me, if not then all the cash I've spent is for nothing and I've eliminated all the things that SHOULD be the problems. Then only thing is the transmission itself.

ibidu1

iTrader: (1)

Dam I just found you one aswell

https://www.ebay.com/itm/07-11-Lexus...1&isGTR=1#shId

ibidu1

iTrader: (1)

By the looks of that old pump, im pretty sure that was your issue. So rest assured, but when you receive the new pump maybe its best to put new bearings in it.

Synch

Thank you for all of your help! That one looks very clean and good, I think I'll need to make mine as same like that so the bolts won't brake.

I hope that the Poland 2008 pump is good too, but I think I'll try to change the bearings.

PS: My pump had bad bearings aswell. From the first bearing you can see that fluid has leaked out and it has been getting too hot. The bearing behind the PCB did come out very easily, I just pulled it out with the whole unit so it wasn't in there tightly.

Synch

It seems that I found the plugs part number 90980-12416 and it says that it's Applications for wheel speed / ant-lock brake (abs) sensors.

ibidu1

iTrader: (1)

Good job! Just make sure to buy some high quality bearings like timkin, skf, nsk

Synch

Can anyone post me pictures of their plugs? The pump side and the car wiring plug.

My car wiring has red and white but oil pump plug has brownish and white plug. That's why I'm concerned that it may not be right.

Lwerewolf

This is what I could find from crawling under the car during the night. I'm guessing there should be 3 wires there. Check if there's another wire deeper in the loom