The Tesla Display Video install -with AMP and DSP
#406
Driver School Candidate
Join Date: Aug 2021
Location: FL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
There are a ton of them and not found it yet. Are you able to drop me an email at RLC1069@AOL.COM? I can send you whatever you need of my info there.
THanks,
Randy
#410
Pole Position
Where do you suggest to buy the unit for my 2010 ISF? Do you have a link...Thx 😎
#412
Pole Position
I thought someone said Phoenix stopped selling them?
#413
Advanced
Thread Starter
The following users liked this post:
MileHIFcar (10-04-21)
#414
Pole Position
Awesome! Thx
#417
Intermediate
Through taking LS460 to Pheonix Automotive to get the android unit installed, I am now communicating on a regular basis with the owner about the redesign of the unit they are doing.
Anyone have suggestions that they would like me to pass on?
He wanted to know people's thoughts on a redesign of the buttons. What do people think of round buttons with ****?
I told him I like idea of a **** but have to keep the buttons square. Any thoughts?
Thanks
Anyone have suggestions that they would like me to pass on?
He wanted to know people's thoughts on a redesign of the buttons. What do people think of round buttons with ****?
I told him I like idea of a **** but have to keep the buttons square. Any thoughts?
Thanks
#419
Driver School Candidate
It needs some actual buttons - or at least haptic feedback when you press the virtual ones. Also they should change colour once activated. Trying to turn on the the demister (for example) is a pain because you have to search for a tiny icon at the bottom whilst you're driving to see if you've pressed it correctly.
Physical buttons would also help with the fan controls, etc. at startup. Mine takes quite a long time to boot so it's irritating having to wait to do something simple like turn off warm air because it was cool yesterday but warm today.
Software-wise, boot speed is obviously important. I got the px6 but it's just too slow. All regular (non-android) systems are ready to go in a couple of seconds so waiting 30+ is ridiculous. It also needs to power down gracefully - for example Poweramp can't save your playing position because there's is no termination signal (I always pause it before turning off now).
Bluetooth - devices can see it but you can't connect to other devices from the px6 - that means you can't use Torque because it can't connect to the OBD2 adapter.
Those are just a few daily annoyances off the top.
Physical buttons would also help with the fan controls, etc. at startup. Mine takes quite a long time to boot so it's irritating having to wait to do something simple like turn off warm air because it was cool yesterday but warm today.
Software-wise, boot speed is obviously important. I got the px6 but it's just too slow. All regular (non-android) systems are ready to go in a couple of seconds so waiting 30+ is ridiculous. It also needs to power down gracefully - for example Poweramp can't save your playing position because there's is no termination signal (I always pause it before turning off now).
Bluetooth - devices can see it but you can't connect to other devices from the px6 - that means you can't use Torque because it can't connect to the OBD2 adapter.
Those are just a few daily annoyances off the top.
#420
Driver School Candidate
Join Date: Dec 2016
Location: california
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
06 backup camera wiring
backup camera diagram for the 2006
At the back of your tesla sceen there should be a brown wire that says back connect that to pin 13 on the k46 plug
then remove glove box and find the k64 plug .and follow diagram
2007-2009 backup camera wiring
2010-2011
these to plug are behind the deck watch the video
The Security light fix =problem doesn't activate when you lock the doors
first remove lower plug from the Tesla unit
then locate the purple wire in tplug (theres 2) the one with the arrow pointed to it
then attach a wire to it and connect into **** 6 in the k99 plug green wire
now your done
This is the air conditiong fix
this how you add the brackets just drill to holes ,by using the template provided with the unit
This is the AIRBASG fix ,ask phoenix android for the 3 wire chip
you will get this
back in 2014 this was my first set up
https://www.youtube.com/watch?v=76wvjLJPNcc&t=5s
At the back of your tesla sceen there should be a brown wire that says back connect that to pin 13 on the k46 plug
then remove glove box and find the k64 plug .and follow diagram
2007-2009 backup camera wiring
2010-2011
these to plug are behind the deck watch the video
The Security light fix =problem doesn't activate when you lock the doors
first remove lower plug from the Tesla unit
then locate the purple wire in tplug (theres 2) the one with the arrow pointed to it
then attach a wire to it and connect into **** 6 in the k99 plug green wire
now your done
This is the air conditiong fix
this how you add the brackets just drill to holes ,by using the template provided with the unit
This is the AIRBASG fix ,ask phoenix android for the 3 wire chip
you will get this
back in 2014 this was my first set up
https://www.youtube.com/watch?v=76wvjLJPNcc&t=5s