derreckla

Question,
I have pin 35 which is the power hooked up to converter hooked up to the red on back of stereo. with converter it still doesn't work but when I removed the 6 volt converter it blows the number 6 5amp fuse which says its for stereo on fuse panel





WHY IS IT BLOWING A FUSE WHEN PIN 35 is supposed to have NO POWER but to draw power to?
meaning I am hooking converter up to power to draw power over to the back up camera through the converter. I know it blows the radio / number 6/ ac fuse because I get no power with multimeter at radio after this is blown.

I must have the wrong wiring....

verly6565

don't bother with there diagram ive almost finished one for you

derreckla

any progress?

thanks

verly6565

yes almost there

derreckla

dont need one of your high quality videos just a diagram....

Thanks

verly6565

This is a backup camera diagram for the LS460
REFER TO MY 2010 GS BACKUP CAMERA VIDEO ITS ALMOST THE SAME

derreckla

I have park assist why does everyone tell me that the CV+- is on this unit behind my glove box?

Thanks

verly6565

we all have park assist, follow my 2010 video, then implement my explanation with the new diagram

this is your camera

derreckla

even though my car is an 2008?

Thanks

derreckla

Please help understand what this diagram is supposed to mean? Thanks

derreckla

I don't have wires on these pins....

derreckla

I do not have plug in my car and my K 47 plug doesn't have wires/pins.

verly6565

in the main picture do you have those plugs ,forget k47 thats for the gs350, yours is J59 andL114

derreckla

what main picture?



This? I don't have this plug. I have the other plug. Do I need to connect it to reverse wire on unit even though my unit senses when it goes in reverse my blank reverse screen comes on and says no video signal...

verly6565

ok that's good now we have find your camera plug ,ill take a look