The Tesla Display Video install -with AMP and DSP
#47
Driver School Candidate
I have a few more photos, but it's just of the unboxing that Phoenix Android asked me for. I am away from home at the moment and can't really get a close up of the plugs. So far what they have told me is that they do not sell amplifiers and the option that we checked for the OEM fiber optic amplifier is an option that lets them know what harness to send OUT. I think you just got blessed because you were working with them when you sent them your radio to decode it either way I kind of now want to change my stock amplifier even though I probably won't need to after I install this radio we'll see how it goes when I get back home
#48
Advanced
Thread Starter
i talked to them .The 2010-2011 will recieve the amp with every order,because of our fiber optic system.but it will work with yours,if you look in the back of the tesla deck it has an optical input ,ill find out why they wont sell it it to 2006-2009
#49
Driver School Candidate
oh wow, thanks for the info. Still bumbed about it. But he . It is what it is.
#50
Advanced
Thread Starter
THIS WILL BE MY NEXT TEST INSTALL
ANDROID 9.0 PX6
ill have them spec it to my circuitry
a few members had issuses with the px6 ill see if i can get them all corrected
ill have it at the end of the week
ANDROID 9.0 PX6
ill have them spec it to my circuitry
a few members had issuses with the px6 ill see if i can get them all corrected
ill have it at the end of the week
The following users liked this post:
Fredd1e (01-20-20)
#55
Driver School Candidate
Hi verly6565,
I hope that you're doing fine with that boot screen alternation.
One first issue might be finding the placeholder for it in the file system
I have worked on with my ANDROID 9.0 PX6.
I disassembled it like the way you did and after that I was able to put it along with all cable harness in the glove box.
After that I had plenty of room to mount the actual screen.
Now I use the original power amplifier with audio output from the PX6.
That along with the OBCD2 signals that seams to go well with the on screen gauges.
Sound is really super with volume up/down controllable, even from the wheel, because that panel is still online with the amp.
However some features are now completely gone:
Regards Freddie
I hope that you're doing fine with that boot screen alternation.
One first issue might be finding the placeholder for it in the file system
I have worked on with my ANDROID 9.0 PX6.
I disassembled it like the way you did and after that I was able to put it along with all cable harness in the glove box.
After that I had plenty of room to mount the actual screen.
Now I use the original power amplifier with audio output from the PX6.
That along with the OBCD2 signals that seams to go well with the on screen gauges.
Sound is really super with volume up/down controllable, even from the wheel, because that panel is still online with the amp.
However some features are now completely gone:
- AC heater/cooler (runs like last setup)
- Screen/mirror de-icing control (stays off)
- Reversing camera (might find from Lexus schematics)
- Internal microphone (schematics too)
Regards Freddie
#57
Driver School Candidate
verly6565
Quick update, Not sure if u remember, I ordered the 10.4 metal trim style.... when I tried to install my unit back in Nov. I had no sound and my A/C function! Bummer right! so i contacted the company and they sent me a new harness because they said that one I placed my order I ordered the one with fiber optic and my car does not have that option. Now the new harness I just received today I'm having the same issue. I'm hoping I'm doing something wrong or forgetting to plug up something because I really dnt want to go through this whole process with phoenix android Radio again. I bought my radio back in October and I still haven't been able to use it. I need some help with this PLEASE! any advice/help would be greatly appreciated.
Quick update, Not sure if u remember, I ordered the 10.4 metal trim style.... when I tried to install my unit back in Nov. I had no sound and my A/C function! Bummer right! so i contacted the company and they sent me a new harness because they said that one I placed my order I ordered the one with fiber optic and my car does not have that option. Now the new harness I just received today I'm having the same issue. I'm hoping I'm doing something wrong or forgetting to plug up something because I really dnt want to go through this whole process with phoenix android Radio again. I bought my radio back in October and I still haven't been able to use it. I need some help with this PLEASE! any advice/help would be greatly appreciated.